Operation Manual

15
Grundeinstellung
Language of display
1 For selecting the language of the display and the reports,
press MENU and numbers 1 and 1 and press OK.
2 Select the desired language with </> and confirm with
OK.
Type of ring signal
You can choose between ten different ring signals.
1 Enter function 44. Press MENU and numbers 4 and 4
and then OK.
2 Select the desired ring signal with 0 to 9.
3 Confirm your setting with OK.
Volume of the ring signal
You can adjust the volume of the ring signal if the fax machine is in stand-
by mode or if it is just ringing. Please note that different volumes can be
set in S and M mode (see Fax switch).
1 By pressing </> the display shows the current setting for
about three seconds.
2 Change the volume by pressing </> until the desired
volume is achieved.
Volume of the loudspeaker
1 You can adjust the volume of the loudspeaker at any time by
pressing DIAL (without built-in answering machine) or l
(with built-in answering machine).
2 By pressing </> the display shows the current setting. If
you wish to adjust the displayed value, press </> until the
desired volume is achieved.
3 Finish your entry by pressing STOP.