Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information Compliance with EMF 2 2 2 2 2 Your wireless on-ear headset 3 What's in the box 3 Other devices 3 Overview of your wireless on-ear headset 3 3 Get started 5 Charge your headset 5 Pair the headset with your mobile phone 5 Multipoint 6 4 Use your headset Connect the headset to a Bluetooth device Manage your calls and music Wear your headset Use with the audio cable 5 Technical data 7 7 7 8 8 9 6 Notice 10 Declaration of conf
1 Important safety instructions General information To avoid damage or malfunction: Caution Hearing Safety •• Do not expose the headset to excessive heat. •• Do not drop your headset. •• Headset shall not be exposed to dripping or splashing. •• Do not allow your headset to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your wireless on-ear headset Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless on-ear headset, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music; • enjoy music on non-Bluetooth devices with an audio cable.
g a Audio cable jack b Micro USB charging slot c Microphone d Volume/Track control button e Call/Music button f LED light g NFC detection area 4 EN
3 Get started Charge your headset Note •• Before you use your headset for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• Finish your call before charging the headset, as connecting the headset for charging will power the headset off. •• You can operate the headset normally during charging.
Note •• Make sure your mobile phone has the NFC feature available and switched on. •• Make sure your mobile phone is not in standby mode. •• Pairing with NFC is only suitable for Android mobile operating system 4.2 or above. •• Refer to the user manual of your mobile phone to identify its NFC detection area. The following example shows you how to pair the headset with your mobile phone. 1 2 Activate the Bluetooth feature of your mobile phone, select Philips Fidelio M2BT.
4 Use your headset Connect the headset to a Bluetooth device 1 Turn on your mobile phone/Bluetooth device. 2 Press and hold the call/music button to turn the headset on. »» The blue LED flashes. »» The headset is reconnected to the last two connected mobile phones/ Bluetooth devices automatically. If one of them is not available, the headset tries to reconnect to the second last connected device. Turn the headset off. Play or pause music. Pick up/ hang up a call. Reject an incoming call.
There is an incoming call. The battery level is low. The battery is fully charged. The blue LED flashes once per second. The white LED flashes. The white LED is off. Wear your headset Adjust the headband to fit your head. Tip •• After use, twist the headset for easy storage. Use with the audio cable Note •• Make sure that you turn off the Bluetooth headset before connecting the audio cable. With the supplied audio cable, you can use the headset with non-Bluetooth devices or on airplane.
5 Technical data • • • • • • • • • • Minimum 10 hours of music time or talk time Minimum 350 hours of standby time Normal time for a full charge: 3 hours Rechargeable Lithium-ion battery (230 mAh) 3.5 mm audio jack for corded headset mode Bluetooth 4.
6 Notice Declaration of conformity Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. This product has been designed, tested and manufactured according the European R&TTE directive 1999/5/EC. Disposal of your old product and battery products and rechargeable batteries.
Trademarks Bluetooth The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations Limited is under license. iPhone, iPad and iPod Touch are trademarks of Apple Inc., registered in the U.S. and other countries.
7 Frequently asked questions My Bluetooth headset is connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headset. My Bluetooth headset does not switch on. The battery level is low. Charge the headset. The audio quality is poor and crackling noise can be heard. The Bluetooth device is out of range.
How can I restore all original headset settings? Press volume/track control button and call music button until the LED flashing white for 5 times sequentially. For further support, visit www.philips.com/ support.
2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. UM_M2BT_00_EN_V1.
