User manual

6 EN
2 Lay at the hinged display.
3 Cut out the template provided (see 'Wall
mount template' on page 24) and place it
on the wall. Then drill two holes of 61mm
wide.
4 Fix 2 screws (not supplied) into each hole.
5 Hang the phone onto the screws.
Tip
• You can use the template provided for accurate
measurement (see 'Wall mount template' on page 24).
1
2
61mm
4
3
5
Insert the supplied batteries
Caution
• Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
• Risk of decreased battery life! Never mix different
brands or types of batteries.
Warning
• Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Note
• Make sure you follow the instructions to install your
phone in order to have all functions working properly.
Congure your phone
(country dependent)
1 When using your phone for the rst time,
you see a welcome message.
2 Press MENU/OK.