User manual

5EN
3 Get started
Caution
• Make sure that you have read the safety instructions in
the 'Important safety instructions' section before you
connect and install your phone.
Connect the base station
Note
• If you subscribe to the digital subscriber line (DSL) high
speed internet service through your telephone line,
ensure you install a DSL lter between the telephone
line cord and the power socket. The lter prevents
noise and caller ID problems caused by the DSL
interference. For more information on the DSL lters,
contact your DSL service provider.
• The type plate is located on the bottom of the base
station.
1 Connect each end of the line cord to:
• the telephone socket at the bottom of
the unit;
• the telephone socket on the wall.
2 Connect the coil cord to the base and
handset.
Manage the cables
You can use your phone on the desk or mount
it on the wall. Refer to the following instructions
to route the cables.
Use your phone on the desk
1 Route the cables.
2 Tilt the hinged display to the desired angle.
Mount your phone on the wall
1 Route the cables.
1
1
2