Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 2 2 Your wireless home monitor 4 4 4 3 Placement 5 4 Set-up 6 6 6 5 Specifications 9 Safety Notice What's in the box Product overview Connect Monitor to Wi-Fi network Use the monitor 6 Troubleshooting 10 EN 1
1 Important • • Safety Caution •• To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. • • • • • • • • • • • • • 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. This offer is valid up to three years after product purchase to anyone in receipt of this information. To obtain source code, please contact open.source@philips.com.
2 Your wireless home monitor Product overview a Please read and understand the accompanied safety sheet before you use this monitor. To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome.
3 Placement You can place the Monitor on a flat surface with the magnetic base. Or you can attach it to the ceiling or wall, see the pictures below: Mount on ceiling If you install on a ceiling, select ‘Image Flip (Image Flip)’ in the ‘Settings ( )’ options of your monitor. Note •• Before you place the monitor, make sure the monitor is close to a power outlet. •• Before you secure the supplied dowels and screws, drill holes on a flat and hard surface.
4 Set-up 4 5 You can see and hear what is happening in your room from anywhere in the world with a smartphone. What you need 6 1 2 3 4 Make sure your Wi-Fi router is turned on and that your Smartphone or Tablet is wirelessly connected to your Wi-Fi router network. Connect the monitor to power. When power is connected, wait till the Monitor light flashes Amber. 2 Connect Monitor to Wi-Fi network 6 In.Sight App will generate a QR code, and hold approx. 15 cm (0.5 ft) in front of the monitor lens.
Application Overview : Monitor Connection status. Green light dot means the monitor is connected to Wi-Fi, and able to stream video. Red light dot means the monitor is not connected or has a problem with connection and no video streaming is possible. In this case, make sure that the monitor is connected to Wi-Fi, and repeat the ‘3 – Set-Up’ if necessary, or consult the ‘Troubleshooting’ section. : Motion alert: this highlights when the monitor detects motion – enable this in ‘Settings’.
Watch the monitor on your web browser After you have registered your account and set up the monitor via your smartphone or tablet, you can also watch it via your favorite web browser (Safari, Chrome, Internet Explorer, Firefox). Enter the following address in your web browser: www.philips.
5 Specifications Note •• Specifications are subject to change without notice Output resolution Lens Frame rate Focus mode Focus range Video format Connectivity Power supply Dimensions (w x h x d) Net weight Operating temperature Software supported VGA, QVGA F2.8 30 fps at VGA, QVGA 0.4m 1 m to infinity h.
6 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the monitor. To keep the warranty valid, never try to repair the monitor yourself. If you have problems using this monitor, check the following points before you request service. If you still have a problem, register your monitor and get support at www.philips.com/support. Cannot connect the monitor to a Wi-Fi network (the monitor light is blinking amber or green).
When on a remote network (either another Wi-Fi network or on 3G), I can only watch for 5 minutes. • When on a remote network – either Wi-Fi or on 3G, you can only watch 5 minutes per session. You have unlimited sessions per day. If you want to watch longer per session, in-app upgrades are available. Go to ‘Settings ( )’ – ‘General (General)’ and select ‘In.Sight Account (In.Sight Account)’. • When you are on your local Wi-Fi network, you have unlimited viewing time.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. M100_12_UM_V2.
