Software Upgrade

Philips AVS
LX8300SA & LX8500W Firmware Upgrade
Firmware Upgrade
We have developed a firmware upgrade to improve your product.
This upgrade is applicable for the following models:
LX8300SA/01, LX8300SA/04, LX8300SA/05, LX8300SA/69
LX8500W/01, LX8500W/04, LX8500W/69, LX8500W/93
This firmware version improves:
Click here for more details
1. Picture freezes for about 2~5 sec but subtitle and audio continue. Then picture speeds up to catch up with
the audio & subtitle
Upgrade Procedure
Ste
p
1
Check your current version
First check your current firmware version to see if you need to upgrade:
1. Power up the set and select DISC source.
2. Open tray by press "OPEN/CLOSE" button on the set or press and hold "STOP" button on the RC.
3. Press "DISPLAY" button on the Remote control.
4. The TV screen will shows:
SD6.3 Vxx YYYY-ZZ A BB
SERVO: nnnnnnnn REG:A
xx = version number
YYYY = model number (eg. 8300, 8500, etc.)
ZZ = slash stroke version (eg. 01, 69, etc.)
A = region code
BB = Front uP software version number
nnnnnnnn = servo version number
Ste
p
2
Download Firmware upgrade
Click the link to save the software on your computer.
Ste
p
3
Burning Upgrade on CD-R / CD-RW
1. Extract the files by unzipping the zipped file – LX8300SA.BIN
(Do not rename the filenames)
Tip: For more
information on burning
software we refer to
two popular burning
software programs
www.nero.com
www.easycdcreator.com
2. Write the extracted files – not the zip file – onto a blank CD-R or CD-RW disc,
using the following settings:
- File System CD-ROM Joliet
- File name length : max 31 chars (ISO Level 2)
- Mode : 2/XA
- Character set : ASCII
- Single session
- Write Speed : Low
3. Finalized the disc. (The application may do this automatically.)