DVD VIDEO DIGITAL SURROUND SYSTEM 3600D LX 1
General Information Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Laser safety This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device.
English ----------------------------------------- 5 English Index ---------------------------------- 42 Bahasa Melayu ---------------------------- 118 3 Bahasa Melayu ---------------------------------- 80
Contents English General Information Getting Started Supplied accessories ................................... 6 Care and safety information ..................... 6 Step 1: Inserting batteries into the remote control .......................................... 15 Using the remote control to operate the system ............................................. 15 Step 2: Setting the TV ......................... 15-16 Selecting the colour system that corresponds to your TV .....................
DVD Menu Options Sound and Volume Controls Basic Operations ....................................... 26 General Setup Menu ........................... 26-31 Program (not for Picture CD/MP3) ..... ............................................................ 26-27 Screen Saver .......................................... 27 Audio Setup Menu .................................... 28 Speaker Menu ....................................... 28 Analog Output ...................................... 28 Video Setup Menu ...
General Information English Supplied accessories Care and safety information Avoid high temperatures, moisture, water and dust – Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight.) Always keep the disc tray closed to avoid getting dust on the lens.
Connections Step 2: Connecting speakers and subwoofer Front Right English Step 1: Set up the speakers Front Left Centre AUDIO ~AC MAINS FRONT CENTER FRONT REAR RIGHT LEFT RIGHT REAR LEFT SUBW SPEAKERS (4 ) TV IN Rear Right You can choose to mount the speakers on the wall. Attach the supplied bracket firmly to the rear of speakers using the supplied screws. Then mount a screw (not supplied) on the wall where the speaker is to be hung and hook the speaker securely onto the mounted screw.
Connections English Step 3: Placing the speakers and subwoofer Front Speaker (Left) 1 Centre speaker and DVD System Front Speaker (Right) 2 1 4 3 Rear speaker (Left) For best possible surround sound, all the speakers (except subwoofer) should be placed at the same distance from the listening position. 1 Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45 degrees from the listening position.
Connections English Step 4: Connecting TV COMPONENT VIDEO IN AUDIO OUT S-VIDEO IN COMPONENT VIDEO IN Pr/Cr AUDIO OUT S-VIDEO IN Pb/Cb VIDEO IN Y COMPONENT VIDEO IN AUDIO OUT S-VIDEO IN Pr/Cr Pb/Cb VIDEO IN Y COMPONENT VIDEO IN Pr/Cr AUDIO OUT S-VIDEO IN Pb/Cb Pr/Cr Pb/Cb VIDEO IN VIDEO IN Y Y 2 2 1 1 FM VIDEO OUT AUDIO Y VIDEO OUT AUDIO CVBS L Y CVBS L Pb REAR LEFT SUBW AR FT R TV IN AUX-IN LINE-OUT Pr Pb S-VIDEO SUBW R TV IN AUX-IN LINE-OUT Pr Pb S-VIDE
Connections English RF coaxial cable to TV 2 COMPONENT VIDEO IN AUDIO OUT S-VIDEO IN Back of RF Modulator (example only) Pr/Cr Pb/Cb INT IN VIDEO IN S-VIDEO IN VIDEO IN AUDIO IN R L Y COMPONENT VIDEO IN AUDIO OUT TO TV Pr/Cr Pb/Cb VIDEO IN Y CH3 CH4 Antenna or Cable TV signal 2 1 1 VIDEO OUT AUDIO Y CVBS VIDEO OUT AUDIO Y L CVBS L REAR LEFT SUBW NT CENTER FRONT T LEFT R TV IN AUX-IN LINE-OUT REAR RIGHT REAR LEFT SUBW R SPEAKERS (4 ) Pr Pb S-VIDEO IMPORTANT! – S-Vid
Connections Step 6: Connecting the power cord English Step 5: Connecting FM/MW antennas ➠ MW antenna FM antenna 1 VOLTAGE SELECTOR LABEL 110127V 1 220240V AUDIO L fix the claw into the slot ~AC MAINS FRONT CENTER FRONT RIGHT LEFT SURR. RIGHT SURR.
Connections (Optional) English Connecting a VCR COMPONENT VIDEO IN AUDIO OUT S-VIDEO IN Pr/Cr Pb/Cb VIDEO IN Y COMPONENT VIDEO IN AUDIO OUT S-VIDEO IN Pr/Cr Pb/Cb VIDEO IN Y 1 ~ AC MAINS ANT IN TO TV VCR 3 FM/MW ANTENNA VIDEO OUT AUDIO Y CVBS L ~AC MAINS FM 75 MW FRONT CENTER FRONT RIGHT LEFT REAR RIGHT REAR LEFT SUBW R SPEAKERS (4 ) TV IN AUX-IN LINE-OUT Pr Pb S-VIDEO 2 4 Viewing and listening to the playback 1 Connect the VCR to the TV as shown.
1 2 3 4 56 7 English Functional Overview 8 VOLUME DVD HOME ENTERTAINMENT SYSTEM IR OPEN/CLOSE PLAY/PAUSE STOP SOURCE PREV NEXT STANDBY-ON Main unit and remote control 1 STANDBY ON (B) – Switches to Eco Power standby mode or turns on the system. – Led ON in Eco Power standby mode. 2 Disc tray 3 System display panel 4 iR SENSOR – Point the remote control towards this sensor. 5 SOURCE – Selects the relevant active source mode: DISC, TV, TUNER or AUX. – DISC: to switch to DISC source mode.
Functional Overview English ª $ REPEAT – Selects various repeat modes. % REPEAT A-B – Repeats a specific section on a disc. 5 • 9 8 0 ≥ ! ! 7 § ∞ ≤ £ ™ @ # $ % ^ & * ( ¡ ) ^ AUDIO – Selects an audio language (DVD) or an audio channel (CD). & MUTE – Mutes or restores the volume. * PROG (PROGRAM) – DISC: starts programming. – TUNER: starts *automatic/ manual preset programming. ( SOUND – Selects a sound effect. ) SLEEP – Sets the sleep timer function. ¡ SURROUND (SURR.
Getting Started Step 2: Setting the TV English Step 1: Inserting batteries into the remote control IMPORTANT! Make sure you have completed all the necessary connections. (See page 9-10 “Connecting TV”). 3 1 Press SOURCE control until “DISC” 1 appears on the display panel (or press DISC on the remote). 2 2 Turn on the TV and set to the correct 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, video-in channel. You should see the blue Philips DVD background screen on the TV.
Getting Started English Selecting the colour system that corresponds to your TV This DVD system is compatible with both NTSC and PAL. In order for a DVD to play on this DVD system, the colour system of the DVD, the TV and the DVD system should match. Step 3: Setting the speakers’ channels You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup.
Step 4: Setting language preference You can select your preferred language settings so that this DVD system will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the disc’s default setting language will be used instead. Except the DVD system’s OSD language, it will remain once selected.
Getting Started English Language Code Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Avestan Aymara Azerhaijani Bashkir Basque Belarusian Bengali Bihari Bislama Bokmål, Norwegian Bosnian Breton Bulgarian Burmese Castilian, Spanish Catalan Chamorro Chechen Chewa; Chichewa; Nyanja Chinese Chuang; Zhuang Church Slavic; Slavonic Chuvash Cornish Corsican Croatian Czech Danish Dutch Dzongkha English Esperanto Estonian Faroese Fijian Finnish French Frisian Gaelic; Scottish Gaelic Gallegan Geor
IMPORTANT! – DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your player. – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the disc player to malfunction.
Disc Operations English Auto Eco Power standby mode This is a power-saving feature, the system will automatically switch to Eco Power standby mode if you do not press any button within 30 minutes after a disc has stopped playing. Basic playback controls Unless stated, all operations described are based on Remote Control control use. Some operations can be carried out using the DVD System Menu. Pausing playback Using the Disc Menu 1 During playback, press Å.
Repeat play mode ● While playing a disc, press REPEAT to select : REPEAT CHAPTER (DVD) – to repeat playback of the current chapter. REPEAT TRACK/TITLE (CD/VCD/DVD) – to repeat playback of the current track (CD/VCD)/title (DVD). REPEAT ALL (CD/VCD/SVCD) – to repeat playback of all the disc and all the programmed tracks. Repeat A-B (DVD/VCD/CD) 1 Press REPEAT A-B at your chosen starting point. 2 Press REPEAT A-B again at your chosen end point.
Disc Operations English Time Search The Time Search function allows you to start playing at any chosen time on the disc. 1 Press OSD. 2 Press 3 4 to highlight time search box. ➜ The on-screen display shows the total playing time of the title/chapter. Special DVD Features Playing a Title 1 Press RETURN/TITLE. ➜ The disc title menu appears on the TV screen. 2 Use 341 2 keys or numeric keypad (0-9) to select a play option. 3 Press OK key to confirm. Camera Angle 3 Press OK keys to select an option.
Disc Operations Playback Control (PBC) For VCD with Playback Control (PBC) feature (version 2.0 only) ● In stop mode, press DISC MENU to toggle between ‘PBC ON’ and ‘PBC OFF’. ➜ If you select ‘PBC ON’, the disc menu (if available) will appear on the TV. ➜ Use the S / T or use the numeric keypad (0-9) to highlight your selection and press OK to confirm to select a play option. ● During playback, press DISC MENU; ➜ If PBC was ON, it will switch to OFF and continue playback.
Disc Operations English Playing MP3/Picture disc (Kodak, JPEG) IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 15 “Setting the TV”). General Operation 1 Load an MP3/Picture (Kodak Picture CD, JPEG) disc. ➜ The MP3/Picture CD menu appears on the TV screen. 2 Use 3 4 to select the folder and press OK to open the folder. 3 Press 3 4 to highlight an option. 4 Press OK to confirm. ➜ The playback will start from the selected file to the end of the folder.
Special MP3/JPEG features IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 15 “Setting the TV”). Preview Function (JPEG) This function shows the content of the current folder or the whole disc. 1 Press Ç during playback. ➜ Thumbnails of 12 pictures appears on the TV screen. Playback with multi-angles (JPEG) ● During playback, press 3 4 1 2 to rotate the picture on the TV screen.
DVD Menu Options English Basic Operations 1 Press SETUP in the STOP mode to enter the Setup Menu. 2 Press OK to enter the next level submenu or confirm your selection. 3 Press 1 2 to enter the submenu or return to the previous menu. 4 Press 34 to highlight the desired menu. 5 Press SETUP to quit the setup menu. ➜ The settings will be stored in the player’s memory even if the player is switched off.
DVD Menu Options Playback tracks 1 After complete programming, press 1 Screen Saver This function is used to turn the screen saver on or off. English Program - cont’d 234 to move the cursor to the START button. 2 Press OK. ➜ Playback will start with the selected tracks under the programmed sequence. - - GENERAL SETUP PAGE - DISC LOCK PROGRAM OSD LANGUAGE SCREEN SAVER ON OFF Quit the program playback 1 In the ‘Program’ menu, use 1 234 to move the cursor to the EXIT button. 2 Press OK to quit.
DVD Menu Options English Audio Setup Menu Analog Output The options included in Audio Setup menu are: Speaker Setup and Analog Output. Set Analog Ouput to match your DVD system’s playback capability and can be accessed via the SURR button on the remote control. - - AUDIO SETUP PAGE - SPEAKER SETUP ANALOG OUTPUT - - AUDIO SETUP PAGE - SPEAKER SETUP ANALOG OUTPUT 1 Press SETUP. 2 Press 1 2 to select the Audio Setup icon. 3 Press OK to confirm. 1 Press 34 to highlight ‘Analog Output’.
DVD Menu Options The options included in Video Setup menu are: TV Type, TV Display, Closed Caption, Progressive and Picture Setting. - - VIDEO SETUP PAGE - TV TYPE TV DISPLAY CLOSED CAPTION PROGRESSIVE PICTURE SETTING 16:9 4:3 Letter Box 4:3 Pan Scan 1 Press SETUP. 2 Press 1 2 to select the Video Setup icon. 3 Press OK to confirm. TV Display Set the aspect ratio of the DVD Player according to the TV you have connected.
DVD Menu Options English Closed Caption Progressive Closed captions are data that are hidden in the video signal on specific discs, invisible without a special decoder. The difference between subtitles and captions is that subtitles are intended for hearing persons and captions are for the hearing impaired. For example, captions show sound effects (e.g., “phone ringing” and “footsteps”), while subtitles don’t.
Picture Setting Password Setup Menu You can personalise your picture colour by adjusting brightness,contrast, tint and colour (saturation). This feature is used for Parental Control. Enter your six digit password when a hint is displayed on the screen. The default password is 842 100. - - VIDEO SETUP PAGE - - - - PASSWORD SETUP PAGE - - TV TYPE TV DISPLAY CLOSED CAPTION PROGRESSIVE PICTURE SETTING 1 Press 34 to highlight ‘Picture Setting’. 2 Enter its submenu by pressing 2.
DVD Menu Options English Preference Setup Menu The options included in Preference Setup menu are: Audio, Subtitle, Disc Menu, Parental, Default, MP3/JPEG Nav and PBC. - - PREFERENCE PAGE - AUDIO SUBTITLE DISC MENU PARENTAL DEFAULT MP3/JPEG NAV PBC Parental 1 Press 34 to highlight ‘Parental’. 2 Enter its submenu by pressing 2. 3 Use 34 to highlight a rating level for the disc inserted.
Default Setup MP3/JPEG Navigator Setting the DEFAULT function will reset all options and your personal settings to the factory defaults except for your Parental Control password. This feature allows you to select alternate settings when you playback picture CD and MP3 CD. - - PREFERENCE PAGE - - - PREFERENCE PAGE - AUDIO SUBTITLE DISC MENU PARENTAL DEFAULT MP3/JPEG NAV PBC RESET 1 Press 34 to highlight ‘Default’. 2 Highlight RESET by pressing 2.
Tuner Operations English IMPORTANT! – Make sure the FM and MW antennas are connected. Using the Plug and Play Plug and Play allows you to store all available radio stations automatically. Tuning to radio stations PLAY/PAUSE 1 Press TUNER on the remote (or press SOURCE control on front panel) to select “FM” or “MW”. AUTO INSTALL PRESS PLAY 2 Press 3 / 4 briefly on the remote. VOLUME ➜ "SEARCH" appears. ➜ The next radio station will tune automatically.
1 Press TUNER on the remote (or press SOURCE control on front panel) to select “FM” or “MW”. 2 Press 1 2 or use the numeric keypad (0-9) to select a preset number to begin. 3 Press and hold PROG until "AUTO" appears. ➜ If a radio station is stored in one of the earlier presets, the same radio station will not store under another preset number. ➜ If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden.
Sound and Volume Controls English Sound Control IMPORTANT! For proper surround sound, make sure the speakers and subwoofer are connected (see page 8). Selecting surround sound ● Press SURR to select : MULTI-channel or STEREO. ➜ The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc. ➜ The centre and surround speakers operate only when the DVD home cinema system is set to Multi-channel mode.
Setting the Sleep timer The sleep timer enables the system to switch to Eco Power standby mode automatically at a preset time. ● Press SLEEP on the remote repeatedly until it reaches the desired preset turn-off time. ➜ The selections are as follows (time in minutes): 15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15… ➜ SLEEP will show on the display panel, except if "OFF" is selected. ➜ Before the system switches to Eco Power standby mode, a countdown of 10 seconds is displayed. "SLEEP10" ™ "SLEEP9"....
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem No power. Solution – – No picture. – – – Distorted or poor picture.
Problem Solution The DVD player does not start playback. – – – – – – Insert a readable disc with the playback side facing down. Check the disc type, colour system and region code. Check for any scratches or smudges on the disc. Press SETUP to turn off the setup menu screen. Change the rating level. Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. Cannot activate some features, such as Angles, Subtitles, or multi-language Audio.
Specifications English AMPLIFIER SECTION MAIN UNIT Output power - Stereo mode (DIN) 50 W + 50 W RMS1 - Surround mode (1 kHz) 50 W RMS/channel Frequency Response 100 Hz – 20 kHz / –3 dB Signal-to-Noise Ratio > 65 dB (CCIR) Input Sensitivity - AUX In 900 mV - TV In 450 mV Power Supply Rating 230 – 240 V; 50 Hz 110 – 127 / 220 – 240 V; 50/60 Hz Switchable Power Consumption Dimensions (w x h x d) Weight 80 W 360 mm x 54 mm x 316 mm 2.9 kg TUNER SECTION Tuning Range FM 87.
Analogue: Sound that has not been turned into numbers. Analogue sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.).
