User Guide

9
English
3139 115 23601
IMPORTANT!
– Component Video connection
provides higher picture quality. This
option must be available on your TV.
– The progressive scan video
quality is only possible through
Component Video (Pr Pb Y) output.
Using Component Video jacks
(Pr Pb Y)
1 Use the component video cables (red/
blue/green) to connect the DVD system’s
Pr Pb Y jacks to the corresponding
Component video input jacks (or labeled
as Pr/Cr Pb /Cb Y or YUV) on the TV.
2 To hear the audio output from the DVD
system through the TV speakers, use the
audio cables (white/red) to connect LINE
OUT (L/R) jacks to the corresponding
AUDIO IN jacks on the TV.
3 If you are using a Progressive Scan TV (TV
must indicate Progressive Scan or
ProScan capability) set the Progressive
setup to ‘ON.’ Otherwise, set it to ‘OFF’
(see page 29.)
F
M
AUDIO
LINE-OUT
L
R
SUBWOOFER
OUT
S-VIDEO
VIDEO OUT
CVBS
PbPr
Y
AUDIO
IN
Pr/Cr
Pb/Cb
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
Pr/Cr
Pb/Cb
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
2
1
IMPORTANT!
– S-Video connection provides
better picture quality. This option
must be available on your TV.
Using S-Video jack
1 Use the S-video cable (not supplied) to
connect the DVD system’s S-VIDEO
OUT jack to the S-Video input jack (or
labeled as Y/C or S-VHS) on the TV.
2 To hear the audio output from the DVD
system through the TV speakers, use the
audio cables (white/red) to connect LINE
OUT (L/R) jacks to the corresponding
AUDIO IN jacks on the TV.
AUDIO
LINE-OUT
L
R
S-VIDEO
VIDEO OUT
CVBS
PbPr
Y
AUDIO
IN
Pr/Cr
Pb/Cb
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
Pr/Cr
Pb/Cb
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
2 1
SUBWOOFER
OUT
Connections
001-039_LX2610_93_Eng1 12/10/2004, 2:00 PM9