Specifications

Alignments
EN 63L04HU AA 8.
Option Bit Assignment
Following are the option bit assignments for all L01 ITV
software clusters.
Table 8-3
Options Bit Description Value
Byte 0 7 Not Used
(TV System) 6
5
4 Default sound 1 = BG (or West EU), 2 =I (or UK), 3 = DK (or East EU), 4 = M, 5 = LL (or France)
3
2
1 Sound Board 0 = Mono (no sound board), 1 = Mulit Stereo, 2 = BTSC Stereo, 3 = AV stereo
0
Byte 1 7 Not Used
(Pin Usage) 6 WideScreen 1 = 16:9 set
5 Rotation 1= Rotation On
4 QSS 1 = UOC and chasis support QSS
3 Uir Msg 1 = Uir Msg supported
2 SPI I2C 1 = I2C at 32-pin card interface
1Not Used
0Not Used
Byte 2 7 SCAVEM 1 = SCAVEM is supported
(Devices) 6 Comb Filter 1 = Comb filter is available
5 EW 1 = Chasis supports East-West alignment
4 OSD Front 1 = Show “FRONT” for AV3, 0 = Show “Side” for AV3
3 Radio 1 = Tuner has FM radio feature and TV chasis support FM radio
2 LNA 1 = Tuner has LNA feature
1 Tuner 0 = None (no tuner), 1 = Philips (model), 2 = Alps (model)
0
Byte 3 7 Not Used
(Devices) 6 Soft Clipper 1 = Soft Clipper on
5Not Used
4Not Used
3 SmartPort 1 = Chasis supports SmartPort (SPI or I2C)
2 Active-Off LED 1 = LED ON
1 WSL 0 = None (no used), 1 =4136 (IR receiver model), 2 =1836 (IR receiver model)
0
Byte 4 7 Not Used
(AV, Tuning) 6 AV3YC 1 = AV3YC available
5 CVI 1 = CVI available
4 AV2YC 1 = AV available
3 AV3 1 = AV available
2 AV2 1 = AV available
1 AV1 1 = AV available
0 RGB 0 = RGB input always allowed, 1 = RGB insertion allowed only when current input source is AV1
Byte 5 7 ITV Ring 1 = ITV Ring available
(Feature) 6 Protection 1 = Protection (TV go to standby). 0 = No protection but errors are still logged.
5 WatchDog 1 = Watchdog feature is enabled
4 No Ident Standby 1 = TV goes standby after 10mins of no RF signal.
3 Buzzer Type 0 = None (no buzzer), 1 = Internal (generated by TV microp), 2 = External (generated by I2C device)
2
1 Clock Type 0 = None (no clock), 1 = OSD, 2 = LED Module
0
Byte 6 7 Not Used
(Power) 6 Not Used
5Not Used
4Not Used
3Not Used
2Not Used
1 Card Power 0 = No card reset, 1 = Card reset at once, 2 = Card reset upon HW reset always,
0 3 = Card reset upon HW, but only when POR monitored