User Guide

Troubleshooting
If a fault occurs, first check the points listed. For further help and other troubleshooting
tips, please also check out FAQ for your camera at www.philips.com/support. If you are
unable to find a solution from these hints, consult your dealer or service center.
WARNING:
Under no circumstances should you try to repair the set yourself, as this will invalidate the
warranty.
8
Problem Cause Solution
Cannot take picture
Battery drained Charge the battery (see step 1, page 2)
Insufficient camera Copy pictures from your camera to your
memory capacity computer and delete the original to free up
memory space for more new pictures.
(see page 7)
Poor light condition Check light conditions
USB doesn't work
Loose connection Check connection
Wrong OS version Your operation system must be later than
Windows 98 or Mac OS 9
USB driver not installed Windows 98 user only: install the USB
driver provided in by-packed CD
Camera connected Connect your camera to another USB
to Mac keyboard port
key10_eng .qxd 28/1/04 15:17 Page 8