Register your product and get support at www.philips.
1 Important 4 4 2 Your ID965 6 6 7 8 Safety instructions What is in the box Overview of the phone Display icons 3 Get started Connect the charger Install the handset Check the battery level Set the date and time Set the date and time format What is standby mode Check the signal strength Switch the handset On/Off 4 Calls Make a call End a call Answer a call Mute the microphone Adjust the earpiece volume Turn the speaker on or off Make a second call Answer a second call Toggle between two calls Make
1 Important •• Do not expose the phone to excessive heat caused by heating equipment or direct sunlight. •• Do not drop your phone or allow objects to Safety instructions Power requirements • This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be lost. • The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60950. Warning •• The Electrical network is classified as hazardous.
The GAP standard guarantees that all DECT™ GAP handsets and base stations comply with a minimum operating standard irrespective of their make. The handset and base station are GAP compliant, which means they guarantee the minimum functions: register a handset, take the line, make a call and receive a call. The advanced features may not be available if you use them with other makes.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
English Overview of the phone a Power supply for handset charger Charging cradle o b n m c l k e j f i g d Guarantee h User Manual EN Quick start guide Note •• In some countries, you have to connect the line adaptor to the line cord, then plug the line cord to the line socket. Note •• In multi-handset packs, there are additional handsets and chargers with power supply units.
Key Name 1 2 Earpiece Right soft key • Select the function displayed on the handset screen directly above the key.
Warning English 3 Get started •• Check the battery polarity when inserting in Caution •• Ensure you have read the safety instructions in the “Important” section before you connect and install your handset. the battery compartment. Incorrect polarity may damage the product. a The batteries are pre-installed in the handset. Follow the direction of the arrow printed on the battery tape and pull it off from the battery door before charging.
Check the battery level What is standby mode The battery icon displays the current battery level. Your phone is in standby mode when it is idle. The standby screen displays the handset name, handset number, date and time, signal icon, and battery icon. The battery is full, the talk time can go up to 14 hours. The battery is empty. Charge it. The handsets turn off if the battery is empty. If you are on the phone, you hear warning tones when the battery is almost empty.
Note •• When the power fails, the phone cannot access emergency services. Redial the most recent number 1 2 3 Press . English 4 Calls Press redial. Press [SELECT]. »» The most recent number is then dialed out. Call from the redial list Tip •• Check the signal strength before you make a call or when you are in a call. For more information, see “Check the signal strength” in the Get started section. You can make a call from the redial list.
2 End a call You can end a call in these ways: • Press ; or • Place the handset to the charging cradle if the auto hang up is activated. Adjust the earpiece volume Press or to adjust the volume during a call. »» The earpiece volume is adjusted and the phone is back to the call screen. Answer a call When the phone rings. Press answer the call. or to Warning •• When the handset rings or when the handsfree is activated, keep the handset away from your ear to avoid ear damage.
Press and to end the current call and answer the first call. 1 2 Toggle between two calls You can toggle your calls in these ways: 1 2 Press and ; or Press [OK] and select [SWITCH CALLS], then press [OK] again to confirm. »» The current call is put on hold, and you are now connected to the other call. Make a conference call Note •• This service is network dependent. Check with the service provider for additional charges.
Make a conference call A 3-way conference call is a call between you, another handset user and the outside callers. It requires two handsets to share the same base station. During an external call 1 2 3 4 Press int to initiate an internal call. »» The handsets available for intercom are displayed. »» The external caller is put on hold. Select or enter a handset number, then press [SELECT] to confirm. »» The selected handset rings. »» The intercom is established. Press and hold int on your handset.
1 2 3 4 5 6 7 8 9 Characters (Lower case) .0,/:;“‘!¡?¿*+-%\^ ~| [Sp] 1 @ _ # = < > ( ) & € £ $¥[]{}¤§… abc2àâÆáãâäåąçćč def3ďđėĕèéêëęΔΦ ghi4ğíìîïlΓ jkl5Λłĺľ mno6ñňńóôõöő pqrs7řşšśβΠΘΣ tuv8ţťùúûüů űμ wxyz9ýžźżƒøΩΞΨ Example to write “Paul” Press 7 once: P Press 2 once: a Press 8 two times: u Press 5 three times: l Switch between uppercase and lowercase By default, the first letter of each word in a sentence is uppercase and the rest is lowercase.
Personalize the sounds Set the handset’s ringtone You can select from 20 ringtones. 1 2 3 Press menu. Select [PERSONAL SET] > [HANDSET TONES] > [RING TONES], then press [SELECT] to confirm. Select a ringtone, then press [SELECT] to confirm. »» The setting is saved. Enhance the audio quality XHD (Extreme High Definition) sound mode is an exclusive feature which transmits high fidelity signals to the handset. It makes the phone conversations sound like real-life conversations.
The phone supports a number of call-related features that help you handle and manage the calls. Auto hang up To end a call, simply place the headset on the base station or charge cradle. Activate/Deactivate auto hang up 1 2 3 Press menu. Select [PERSONAL SET] > [AUTO HANG-UP], then press [SELECT] to confirm. Dial mode Note •• This feature only applies to models that support both tone and pulse dial. Dial mode is the telephone signal used in your country.
Carrier code Note •• This feature only applies to models with carrier code support. Some service providers require a carrier code to be added when you make a call outside the local area. This feature can decide automatically if a carrier code is needed when you return a call from the incoming call log. You can define an area code (up to 5 digits). This area code is automatically removed from an incoming call if it matches with the code you define.
First ring This feature checks and formats your outgoing call number before it is dialed out. The prefix number can replace the detect number you set in the menu. For example, you set 604 as the detect number and 1250 as the prefix. When you have dialed out a number such as 6043338888, your phone changes the number to 12503338888 when it dials out. If you have subscribed for caller ID service with your service provider, your phone can suppress the first ring before the caller ID displays on the screen.
9 Advanced settings Unregister the handsets 1 Register the handsets 2 3 You can register additional handsets to the base station. The base station can register up to 5 handsets. 4 Manual registration 5 Register your handset manually to the base station. 1 2 3 4 5 Press menu on the handset. Select [ADVANCED SET] > [REGISTER], then press [SELECT] to confirm. Press and hold on the base station for 5 seconds until you hear a confirmation beep. Enter the system PIN. Press [CLEAR] to make corrections.
11 Technical data Language Handset name Date Date format Time Time format Auto clock Clock in standy mode Alarm Phonebook list Auto hang up Recall time Area code Carrier code Network type Display • Progressive LCD backlight General telephone features • Dual mode caller name & number identification • 15 polyphonic ringer melodies and 5 standard ringer melodies • Conference call and voicemails • Intercom Battery • 2 x AAA Ni-MH 1.2V Rechargeable 750mAh batteries Adaptor • Charger: Input 100-240V 50/60Hz 0.
12 Frequently asked questions The signal icon flashes. •• The handset is out of range. Move it closer to the base station. If the handset displays [UNREGISTERED], register the handset. Tip •• For more information, see “Register the handsets” on the Advanced settings section. IF I fail to register the additional handsets to the base station, what do I do? Your base memory is full. Unregister the unused handsets and try again. No dialing tone •• Check your phone connections. •• The handset is out of range.
ANNEX 1 English Hereby, Philips Consumer Lifestyle, BU P&A, declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Finnish Philips Consumer Lifestyle, BU P&A vakuuttaa täten että [type of equipment) tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
0168 © 2009 Koninklijke Philips Electronics N.V. All rights reserved. ID965_12 Single HS_Book 2.indb Printed in China 132 ID965H_12_UM_V3.
