ID937_QSG_EN_US_version.
ID937_QSG_EN_US_version.fm Page 2 Thursday, February 8, 2007 3:45 PM What’s in the box Handset Line cord User Guide Base station Power supply for base station 2 AAA rechargeable NiMH batteries Quick Start Guide Splitter Warranty card The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
ID937_QSG_EN_US_version.fm Page 3 Thursday, February 8, 2007 3:45 PM EN 1 Connect Connect the base station 1. Place the base station in a central location near the telephone line socket and electricity sockets. Power supply Line cord Splitter 2. Connect the supplied splitter to the connector at the back of the base station and then plug the line cord and the power cable into the respective line jacks on the splitter. 3.
ID937_QSG_EN_US_version.fm Page 4 Thursday, February 8, 2007 3 3:45 PM Enjoy Make a call Enter the phone number and press r. OR Press r and enter the phone number. Answer a call When the phone rings, press r key. End a call Press e key. Adjust earpiece volume during a call Press : to select from Volume 1 to Volume 5. Set the ring melody 1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones, scroll : to Ring Melody and press mSELECT. 2.
ID937_QSG_EN_US_version.fm Page 5 Thursday, February 8, 2007 3:45 PM EN Switch the handset On/Off Press and hold e key for 3 seconds to switch off the handset in stand-by mode. Short press e key to switch on the handset again. Keypad lock/unlock Press and hold F key for 2 seconds to lock or unlock keypad in stand-by mode. Paging 1. Short press pkey on the base. The handset starts to ring. 2. Once retrieved, press any key on the handset to end the paging.
ID937_QSG_EN_US_version.fm Page 6 Thursday, February 8, 2007 3:45 PM Troubleshooting For more information, please refer to page 52 of the user manual.
