)$ ?)&5?%. BOOK 0AGE &RID AY $ECEMBER 0- %.
ΣΕ435_ΙΦΥ_ΕΝ.
ID937_IFU_EN.
ID937_IFU_EN.book Page 4 Thursday, December 21, 2006 11:36 AM Important Information EN For your safety This equipment is not designed to make emergency calls in the event of a power failure. Alternative arrangements should be made for access to emergency calls. To avoid damage or malfunction: - Do not allow the product to come into contact with liquid. Do not open it as you could be exposed to high voltages. Never use any battery type other than the one supplied.
ID937_IFU_EN.book Page 5 Thursday, December 21, 2006 11:36 AM What’s in the box? EN The following accessories are included with your ID937: Handset Splitter Base station User Guide Power supply for base station Quick Start Guide Line cord 2 AAA rechargeable batteries Warranty card The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
ID937_IFU_EN.book Page 6 Thursday, December 21, 2006 11:36 AM Your ID937 EN Overview of the handset Event LED (top of the handset) LCD Screen Up/Down Navigation keys Earpiece Left Soft key Right Soft key Talk key Hang-up key Alphanumeric keypad Keypad lock key Case key / Pause key / Ringer off key Loudspeaker key Intercom key .
ID937_IFU_EN.book Page 7 Thursday, December 21, 2006 11:36 AM Your ID937 EN Handset keys Press To m Enter the main menu from stand-by mode. Select the function displayed on the handset screen directly above it. Activate mute function during a call. Switch on the backlight. (Left soft key) > (Right soft key) r e u d c v # * Go to redial list from stand-by mode. Select the function displayed on the handset screen directly above it.
ID937_IFU_EN.book Page 8 Thursday, December 21, 2006 11:36 AM Your ID937 EN Display icons & symbols In stand-by mode, several icons & symbols may be displayed on the top row of the handset screen. The handset is registered and within range of the base station. It blinks when the handset is out of range or is searching for a base. Battery symbol indicating 3 different battery levels. The ringer volume is set to zero. The keypad is locked.
ID937_IFU_EN.book Page 9 Thursday, December 21, 2006 11:36 AM Your ID937 EN Overview of the base station SIM card cover Paging key Main features of your ID937 The following is an overview of the menu options that are available in your ID937. For detailed explanation of the menu options, please refer to the corresponding sections in this User Guide. Menu To Page SMS Setup, write/read SMS, etc. 27 PHONEBOOK Add, edit, manage phonebook entries and copy phonebook entries from SIM card.
ID937_IFU_EN.book Page 10 Thursday, December 21, 2006 11:36 AM Your ID937 EN Menu navigation The basic steps of navigating through the menus and options are as follows: Task Action Enter main menu/menu options Choose MENU by pressing the key directly below it (left soft key m) Illustration Philips 1 18:00 08-08 REDIAL MENU m :> • Go to a specific menu/option 1. Press : key to scroll to your desired menu/option • Confirm your selection 2.
ID937_IFU_EN.book Page 11 Thursday, December 21, 2006 11:36 AM Connect EN The location of your base station can have an effect on the range and performance of your ID937 (see TIP below). Connecting the Base Station 1. Place the base station in a central location near the telephone line socket and electricity sockets. Power supply Line cord Splitter 2.
ID937_IFU_EN.book Page 12 Thursday, December 21, 2006 11:36 AM Install EN Install battery Your ID937 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of talk-time and up to 150 hours stand-by time. Before using the handset, the batteries have to be installed and fully charged. 1. Use the coin or screwdriver to unlock the battery cover. screw screw anticlockwise charger contact plate Unlock Bottom View 2. Place the batteries as indicated and replace the cover. 3.
ID937_IFU_EN.book Page 13 Thursday, December 21, 2006 11:36 AM Install 2. EN A charging animation on the handset indicates that the battery is charging. 1 Philips 08-08 MENU 18:00 REDIAL 3. Leave it there until the batteries are fully charged (at least 24 hours). 4. The handset is fully charged when the charging animation stops and is displayed. The handset must be charged for at least 24 hours before using it for the first time.
ID937_IFU_EN.book Page 14 Thursday, December 21, 2006 11:36 AM Install EN Set date and time 1. Press mMENU. 2. Scroll : to Clock & Alarm and press mSELECT. 3. Press mSELECT to enter Set Date/Time. 4. Enter current time (HH:MM) and current date (DD/MM/YY) and press mOK. WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider.
ID937_IFU_EN.book Page 15 Thursday, December 21, 2006 11:36 AM Install EN Screen and keypad backlight The backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting up the handset off the base station, etc. The colour of the LCD and keypad backlight is WHITE. For setup details, please refer to "Backlight time" on page 41. Event LED The event LED on your handset blinks when there is a new message recorded on your telephone answering machine.
ID937_IFU_EN.book Page 16 Thursday, December 21, 2006 11:36 AM Call EN Make a call Predialling 1. Enter the phone number (maximum 20 digits). 2. Press r to dial the number. Direct dialling 1. Press r or v to take the line. 2. Enter the phone number. Call from redial list 1. Press >REDIAL in stand-by mode. 2. Scroll : to an entry in the redial list. 3. Press r to dial the number. TIP The handset stores the last 7 numbers dialled. The last number dialled will appear first in the redial list.
ID937_IFU_EN.book Page 17 Thursday, December 21, 2006 11:36 AM Call EN Handsfree answering When the phone rings, press v key. Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted. TIP If Auto Pick-up mode (see page 40) is activated, you can simply lift up the handset from its base station to answer the call. This feature is deactivated by default.
ID937_IFU_EN.book Page 18 Thursday, December 21, 2006 11:36 AM Call EN Initiate a second call (subscription dependent) 1. Press >OPTION and select Init. 2ND Call to put the current call on hold and initiate a second external call. Consult phonebook 1. Press >OPTION and select Phonebook to access and review phonebook entries. 2. Press r on the selected phonebook entry, the corresponding number will be dialled. Activate/deactivate HD Sound mode (see page 47) 1.
ID937_IFU_EN.book Page 19 Thursday, December 21, 2006 11:36 AM Call EN Switch between an internal and external call 1. Press c key once to switch between an internal call and external call. Three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. 1.
ID937_IFU_EN.book Page 20 Thursday, December 21, 2006 11:36 AM Phonebook EN Phonebook New Entry List Edit Entry Delete Entry Delete All Direct Memory Copy from SIM Phbk transfer Your ID937 can store up to 250 phonebook memories, including 10 direct access memories (0 to 9). Each phonebook entry can have a maximum of 20 digits for the phone number and 14 characters for name. Access phonebook 1.
ID937_IFU_EN.book Page 21 Thursday, December 21, 2006 11:36 AM Phonebook 5. EN : to choose a group (, , , ) and press mSELECT. Scroll A validation tone is emitted. You can assign individual contacts to specific groups of your choice. For example, Group A contains phone numbers of all your co-workers. You can also assign a specific ring melody to that group (see "Group Melody" on page 38).
ID937_IFU_EN.book Page 22 Thursday, December 21, 2006 11:36 AM Phonebook EN Store direct access memory You can store up to 10 direct access memories (Key mode will automatically dial the stored phone number. 0 to 9). A long press on the keys in stand-by 1. Press mMENU, scroll press mSELECT. : to Phonebook and press mSELECT, scroll : to Direct Memory and 2. Select a key (Key 0 to Key 9) and press mVIEW. If there is a stored number in that key, the number/ name will be displayed. 3.
ID937_IFU_EN.book Page 23 Thursday, December 21, 2006 11:36 AM Phonebook EN 2. Slide the SIM card between the retaining clips, microchip facing down, until it stops. 3. Slide the SIM card cover back on the base station until it latches. 4. On the handset, press mMENU, scroll from SIM and press mSELECT. 5. Scroll : to Copy All or Select Entry. If you choose Copy All then all entries in the SIM card will be copied to your phonebook.
ID937_IFU_EN.book Page 24 Thursday, December 21, 2006 11:36 AM Phonebook EN If you choose Select Entry, you can browse the phonebook entries and select the ones you wish to copy. For each selected entry, you will be prompted on the selected handsets whether or not to overwrite the phonebook entry in the target phonebook. OVERWRITE? will be displayed on the selected handsets, press mYES to confirm or >NO to cancel. 3. Press mSELECT to confirm. 4.
ID937_IFU_EN.book Page 25 Thursday, December 21, 2006 11:36 AM Call log EN The call log offers quick access to the Call List, Answ. Machine and SMS sub-menus. The Call List records the last 30 entries of your incoming calls. If you have subscribed to Caller Line Identification service, the identity of the caller (caller’s number or name) will be displayed together with the date and time of the call.
ID937_IFU_EN.book Page 26 Thursday, December 21, 2006 11:36 AM Call log EN Access redial list 1. Press >REDIAL in stand-by mode and scroll : to view the entries. View details of a redial list entry 1. Press >REDIAL in stand-by mode and scroll : to select an entry. 2. Press mMENU and press mSELECT to View. Save redial list entry to phonebook 1. Press >REDIAL in stand-by mode and scroll : to select an entry. 2. Press mMENU, scroll : to Save number and press mSELECT. 3. Enter name and press mOK.
ID937_IFU_EN.book Page 27 Thursday, December 21, 2006 11:36 AM SMS EN SMS Write a SMS Inbox Draft box SMS Settings SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line Identification Service (CLI) together with SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI and SMS services.
ID937_IFU_EN.book Page 28 Thursday, December 21, 2006 11:36 AM SMS EN Key 1 2 3 4 5 6 7 8 9 0 * 4. Operation space 1 @ _ # = < > ( ) & € £ $ ¥ [ ] { } ¤ § abc2àäçåæ def3éè∆Φ ghi4 ìΓ jkl5Λ mno6ñòö pqrs7βΠΘΣ tuv8ùü wxyz9øΩΞΨ .0,/:;"’!¡?¿.+-%\^~| * Enter the text and press mOK. You can enter up to 160 characters for an SMS. If you receive a call while writing an SMS, the operation will be interrupted. When you go back to SMS editing, the message will be retrieved automatically. 5.
ID937_IFU_EN.book Page 29 Thursday, December 21, 2006 11:36 AM SMS 7. EN Press mSELECT to Send the message. The message will be sent immediately. SMS Sent! will be displayed if the message has been sent successfully. If the message cannot be sent successfully, the screen will display SMS not Sent! and the message will be saved in the SMS editor buffer. WARNING When composing your SMS, if no keys are pressed for 30 seconds, the handset will return to stand-by mode.
ID937_IFU_EN.book Page 30 Thursday, December 21, 2006 11:36 AM SMS EN Reply to an Inbox message 1. While viewing the message content, press mMENU to display the Inbox menu options. 2. Scroll : to Reply and press mSELECT to start editing. 3. After editing, press mOK to confirm the message. 4. Refer to steps 5 to 7 in "Write and send new SMS" on page 27 to send the message or steps 1 to 3 in "Save a message in the Draft box" on page 31 to save the message in the Draft box.
ID937_IFU_EN.book Page 31 Thursday, December 21, 2006 11:36 AM SMS EN Draft box SMS messages that are saved as drafts will be automatically stored in the Draft box. The Draft box can store up to 10 messages. Save a message in the Draft box 1. After writing the message, entering the phone number and the desired box, press mOK. 2. Scroll to Save as draft. 3. Press mSELECT to confirm. Review Draft messages 1. Press mMENU, press mSELECT to enter SMS, scroll : to Draft box and press mSELECT. 2.
ID937_IFU_EN.book Page 32 Thursday, December 21, 2006 11:36 AM SMS EN Delete all Draft messages 1. While viewing the message content, press mMENU to display the Draft box menu options. 2. Scroll : to Delete All and press mSELECT. 3. Press mSELECT again to confirm deletion. SMS settings This menu allows you to set up the server for sending and receiving SMS messages. Your ID937 can receive messages from 3 service centers.
ID937_IFU_EN.book Page 33 Thursday, December 21, 2006 11:36 AM SMS 5. EN Enter PIN again and press mOK. You can choose to leave the PIN empty. If no PIN is required, simply press mOK when prompted to enter PIN. 6. Enter the SMS box number and press mOK. If the number entered already exist, an error tone is emitted. If the number entered is accepted, a validation tone is emitted and the screen returns to SMS boxes list. To change the password of an SMS Box (only for UK) 1.
ID937_IFU_EN.book Page 34 Thursday, December 21, 2006 11:36 AM SMS EN To set incoming number 1. Press mMENU, press mSELECT to enter SMS, scroll : to SMS Settings and press scroll : to SMS Center 1, SMS Center 2 or SMS Center 3 and press mSELECT. 2. Scroll : to Incoming Nr. and press mSELECT. 3. Enter the number and press mOK to confirm. A validation tone is emitted. mSELECT, The maximum length of an incoming number is 20 digits. Default SMS center The default SMS center number is 1.
ID937_IFU_EN.book Page 35 Thursday, December 21, 2006 11:36 AM Clock & Alarm EN Clock & Alarm Set Date/Time Alarm Alarm Tone Do not Disturb Set date and time 1. Press mMENU, scroll : to Clock & Alarm and press mSELECT, press mSELECT again to enter Set Date/Time. 2. Enter the current time (HH:MM) and current date (DD/MM/YY) and press mOK. Enter the date in Day/Month/Year format and the time in 24-hour format. 3. A validation tone is emitted and the screen returns to Clock & Alarm menu.
ID937_IFU_EN.book Page 36 Thursday, December 21, 2006 11:36 AM Clock & Alarm EN Do not Disturb mode This feature is available only if you have subscribed to Caller Line Identification from your network provider. When Do not Disturb mode is activated, the phone will ring only when there are calls received from authorised groups. For all other callers, the phone will display an incoming call message or the backlight will be turned on, but it will not ring.
ID937_IFU_EN.book Page 37 Thursday, December 21, 2006 11:36 AM Personal Settings EN Personal Set Handset Tones Wallpaper Contrast Handset Name Auto Pick-up Auto Hang-up Language Babysit Mode Backlight Time Theme Colour Handset Tones Ring Volume There are 5 ringer volume options (Silence, Low, Medium, High and Progressive). The default level is Medium. To set ring volume 1.
ID937_IFU_EN.book Page 38 Thursday, December 21, 2006 11:36 AM Personal Settings EN Group Melody To benefit from this feature, you must subscribe to the Caller Line ldentification service. See "Caller Line Identification" on page 19. This menu enables you to select and set the melodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and is part of a group. You can associate 1 ring melody to each group.
ID937_IFU_EN.book Page 39 Thursday, December 21, 2006 11:36 AM Personal Settings EN Wallpaper This feature allows you to select the wallpaper to be displayed in stand-by mode. There are 6 wallpapers pre-installed on your handset. The 6th wallpaper is a blank wallpaper. Please see "Default settings" on page 15 for the default wallpaper. To set wallpaper Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Wallpaper and press mSELECT. 2.
ID937_IFU_EN.book Page 40 Thursday, December 21, 2006 11:36 AM Personal Settings EN Auto Pick-up This function enables you to answer a call automatically by simply lifting the handset from the base station. By default, the Auto Pick-up feature is Off and in this case you have to press the r key to answer a call. To set Auto Pick-up mode Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Auto Pick-up and press mSELECT. 2. Scroll : to On or Off and press mSELECT to confirm. 1.
ID937_IFU_EN.book Page 41 Thursday, December 21, 2006 11:36 AM Personal Settings EN To activate Babysit mode 1. Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Babysit mode and press mSELECT. In Babysit mode, all keys are deactivated except for mMENU key. Babysit mode is displayed on the screen when this function is activated and the handset cannot perform any normal operation (making an outgoing call, receiving an incoming call, intercom another handset, paging, etc.) 2.
ID937_IFU_EN.book Page 42 Thursday, December 21, 2006 11:36 AM Advanced Settings EN Advanced Set Recall Time Dial Mode Call Barring Baby call Registration Select Base Unregistration Change PIN Reset Auto prefix Conference HD Sound Demo Mode Recall Time Recall time (or dial delay) is the time delay by which the line will be disconnected after you press r key. It can be set to short, medium or long.
ID937_IFU_EN.book Page 43 Thursday, December 21, 2006 11:36 AM Advanced Settings EN Dial Mode The default value for dial mode that is preset in your ID937 should be the best suited for your country network and therefore you should not need to change it. There are 2 dial modes: Tone or Pulse To set dial mode Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Dial Mode and press mSELECT. 2. Scroll : to Tone or Pulse and press mSELECT to confirm. 1.
ID937_IFU_EN.book Page 44 Thursday, December 21, 2006 11:36 AM Advanced Settings EN Baby Call When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 20 digits for baby call number. To activate Baby Call mode Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Baby call and press mSELECT. 2. Enter the Master PIN when prompted and press mOK to confirm.
ID937_IFU_EN.book Page 45 Thursday, December 21, 2006 11:36 AM Advanced Settings EN To register an additional handset 1. On the base station, press and hold done within 1 minute. p for 3 seconds. After that, the registration procedure has to be Within 1 minute, the base station is able to accept registration from a handset. If there is no action taken on the handset within 10 seconds, the registration procedure will be aborted. 2.
ID937_IFU_EN.book Page 46 Thursday, December 21, 2006 11:36 AM Advanced Settings EN Change Master PIN The Master PIN is used for setting call barring/baby call number, registration/unregistration of handsets and for accessing the answering machine remotely. The default Master PIN number is 0000. The length of the PIN is 4 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.
ID937_IFU_EN.book Page 47 Thursday, December 21, 2006 11:36 AM Advanced Settings EN Conference Mode When conference mode is activated, you can initiate a three-party conference call with a second handset registered to your base station automatically if the second handset takes the line when there is already an external call in progress. The default setting for this mode is Off.
ID937_IFU_EN.book Page 48 Thursday, December 21, 2006 11:36 AM Network Services EN Net. Service Call Forward Call Fwd Busy Call Fwd UnAns Voice Mail Call Back Cancel Call Bk Withhold ID This menu provides a convenient means for you to access, activate or deactivate some network services that are country/subscription dependent. Contact your network provider for more information about these services.
ID937_IFU_EN.book Page 49 Thursday, December 21, 2006 11:36 AM Network Services 2. EN Scroll : to the type of call forwarding option you wish to set (Call Forward / Call Fwd Busy / Call Fwd UnAns) and press mSELECT. 3. Scroll : to Deactivate and press mSELECT to confirm. 4. The number for that selected service will be dialled. 5. When the number has been dialled, press e to return to stand-by mode.
ID937_IFU_EN.book Page 50 Thursday, December 21, 2006 11:36 AM Network Services EN Cancel Call Back Setting 1. Press mMENU, scroll press mSELECT. : to Net. Service and press mSELECT, scroll : to Cancel Call Bk and 2. Scroll : to Settings and press mSELECT. 3. Enter the required number for cancelling of call back and press mOK. Activate Cancel Call Back 1. Press mMENU, scroll press mSELECT. : to Net. Service and press mSELECT, scroll : to Cancel Call Bk and 2. Press mSELECT to Activate. 3.
ID937_IFU_EN.book Page 51 Thursday, December 21, 2006 11:36 AM Games EN Games Memory Puzzle Tetris Memory The objective of this game is to find and match different pairs of graphics in the shortest possible time using your memory. To win, you have to complete matching all 8 pairs of graphics in a 4x4 matrix. To start the game 1. 2. Press mMENU, scroll : to Games and press mSELECT, press mSELECT to enter Memory game. An instruction screen is displayed.
ID937_IFU_EN.book Page 52 Thursday, December 21, 2006 11:36 AM Telephone Answering Machine (TAM) EN Answer Machine Play Delete All Record Memo Answ. Mode Ans. On/Off Ans. Settings Your ID937 features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 99 messages within the maximum recording time of 15 minutes. The maximum recording time for each message is 3 minutes.
ID937_IFU_EN.book Page 53 Thursday, December 21, 2006 11:36 AM Telephone Answering Machine (TAM) EN Delete All 1. Press mMENU, scroll press mSELECT. : to Answer Machine and press mSELECT, scroll : to Delete All and 2. Press mOK to confirm deletion of all your messages. Unread messages will not be deleted. Memo recording You can record a reminder message for yourself or for anyone else who uses your answering machine.
ID937_IFU_EN.book Page 54 Thursday, December 21, 2006 11:36 AM Telephone Answering Machine (TAM) EN Personalised Outgoing Messages If you set your outgoing message as Personalised, you can either play the existing outgoing message or record your own outgoing message. Playing your Personalised Outgoing Message 1. Scroll : to Play message and press mSELECT. 2. The existing outgoing message will be played and the screen will return to previous menu once it has finished playing.
ID937_IFU_EN.book Page 55 Thursday, December 21, 2006 11:36 AM Telephone Answering Machine (TAM) 8. EN You can then set the answering mode as Answer Only or Answ. & Record, and choose to set your outgoing message as Predefined or Personalised (special VIP message). Refer to "Predefined Outgoing Messages" and "Personalised Outgoing Messages" above for the steps to record and play your outgoing messages for the VIP list. Delete VIP numbers 1. Press mSELECT to enter the VIP List. 2.
ID937_IFU_EN.book Page 56 Thursday, December 21, 2006 11:36 AM Telephone Answering Machine (TAM) EN Remote control access This feature lets you check your messages, or otherwise operate your answering machine, by calling the answering machine and entering a remote access code (which is the same as your Master PIN code) on a tone dialling phone. To prevent unauthorised access to your answering machine, your Master PIN code must be changed (see page 46). Activate/Deactivate remote access 1.
ID937_IFU_EN.book Page 57 Thursday, December 21, 2006 11:36 AM Telephone Answering Machine (TAM) EN Set Handset Call Screening 1. Press mMENU, scroll : to Answer Machine and press mSELECT, scroll : to Ans. Settings and press mSELECT, scroll : to HS Screening and press mSELECT. 2. The last selected option is highlighted. 3. Scroll : to On or Off and press mSELECT to confirm. If you have multiple handsets, only 1 handset can enable handset call screening for each call.
ID937_IFU_EN.book Page 58 Thursday, December 21, 2006 11:36 AM Troubleshooting EN Troubleshooting of the phone Please refer to the following website for more information on Philips web support: www.philips.
ID937_IFU_EN.
ID937_IFU_EN.book Page 60 Thursday, December 21, 2006 11:36 AM Troubleshooting EN Troubleshooting of the Answering Machine Problem Causes Solution The answering machine does not record messages • Memory is full • Delete old messages • The ANSWER ONLY mode has been activated • Activate Answ.
ID937_IFU_EN.book Page 61 Thursday, December 21, 2006 11:36 AM Information EN Electric, Magnetic and Electromagnetic Fields ("EMF") 1. 2. 3. 4. 5. Philips Royal Electronics manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals.
ID937_IFU_EN.
ΣΕ435_ΙΦΥ_ΕΝ.βοοκ Παγε 3 Φριδαψ, ∆εχεµβερ 16, 2005 1:15 ΠΜ Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2006 © Koninklijke Philips Electronics N.V. All rights reserved. www.philips.
