Register your product and get support at www.philips.
1 9 Important 4 4 Safetyy 5 5 What’s in the boxx 3 Get started Understand the humidity indicator light Understand the healthy air protect alert Understand the healthy air protect lockk Change the fan speed Auto Manual Turbo Set the timerr Set the humidity level Water level Clean the water tankk
1 Important Safety Read this user manual carefully before you use ) * Danger Caution ' ( ' ' ' ' ! F ' * The water in the water tank is not suitable for drinking. Do not drink this water and do not use it to feed animals or to water plants. When you empty the water tank, pour the water down the drain.
Congratulations on your purchase, and welcome to Philips! : offers, register your product at www.Philips. com/welcome. : ) air to your house for the health of your family. It offers you an advanced evaporation system of the dry air in your home. It retains bacteria, calcium and other particles from the water.
3 Get started 1 2 Hold by both sides of the upper cover to lift it up. % until the water reaches the water indication level.
Understand the humidity indicator light The humidifier is equipped with a built-in humidity sensor. The current humidity level is shown on the display (40, 50 or 60 percent). Note •• The accuracy of the humidity indication is approximately plus or minus 5%. •• It takes some time to measure the humidity level in the room..
» The humidity sensor light is on. Change the fan speed Auto Note AUTO mode is only available for HU4903. » The current fan speed is shown. The automatic mode uses the digital sensor to constantly monitor the air quality. It turns to ensure the humidity level is constantly at the right level. The default humidity level of the automatic mode is set at 50%, but you can change to your desired humidity level for the automatic mode.
Press the SPEED button to select the AUTO mode. 2 Tip ' ( ) changes to a lower fan speed automatically. Press the SPEED button once or more times to select the desired fan speed # #AUTO , and/or &* English 2 Tip ' AUTO and Turbo modes are only available for HU4903. ' % HU4902 and non-auto mode of HU4903: if the desired humidity level is reached, you can change to a lower fan speed.
2 Press the SPEED button once or more times to select the Turbo mode. » and are on. 1 2 Set the timer Press the button to switch on the * Press the TIMER button to activate the timer. » The TIMER #1H, 4H or 8H& on. With the timer function, you can let the * > ) automatically switches off.
Note ' $ # ?\ @) ? @&* ' When there is not enough water in the water tank, ' F * ' the red indicator light starts blinking. Press the HUMI button once or more times to set the desired air humidity to 40, 50, 60 percent or no preset level. » : #40 # , 50 or 60& F ) it changes and stays at the current humidity level.
2 3 Remove the water tank from the * % until the water reaches the maximum water indication level.
Place the upper cover back at the * ! tank 1 2 3 # $ ! Remove the upper cover. 4 Put the upper cover back to the appliance. English 5 % 1 2 % < * Pour the water to the water tank from the top central opening until the top of F opening completely. % < * Pour it into the water tank until the water reaches the maximum water level indication.
5 Clean your humidifier Our Philips designers have created a bestin-class design for cleanability, empowering consumers to take control of the hygiene * ] ] easier.
3 : F clockwise to remove it. English 6 Clean the humidification filter 2 1 every week to keep it hygienic. 1 2 4 * Remove the water tank from the * 5 F * slowly running tap.
6 7 > F * : F put it back in place. 2 3 Remove the water tank from the * : F clockwise to remove it. 2 2 1 1 4 & Note ' ( avoid scale build-up, which seriously affects the humidifying performance.
Mix white vinegar with an equal amount of tap water in a container that is large in. 10 F * English 5 Water : Vinegar 1:1 1 hour 11 : F clockwise to put it back in place. Note 2 ' The white vinegar is composed with of 5% acetic ' 6 7 8 9 acid. ( # & ) make sure that the side with the white deposits is immersed in the water.
7 Replace the filters 3 : F clockwise to remove it. 2 1 a year for optimal performance. Note ' B ) HU4101. 4 * Tip ' Register your product at www.Philips.com for further 1 * * 5 2 18 Remove the water tank from the appliance.
> F Replace the anti-bacterial English 6 Note : " HU4903. ' B " ) HU4111 7 : F put it back in place. " year to prevent the bacteria from growing in the water tank.
8 Troubleshooting This chapter summarizes the most common problems you could encounter with the * ( problem with the information below, contact the Consumer Care Center in your country. Problem Possible solution ' does not work.
Possible solution There is unpleasant smell coming out from ) ( $ * ( # ? @&* No air comes out of the air outlet. I do not see visible mist coming out ) Is it working? > ) * : * : ) the mist.
9 Guarantee and service If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips # F &* ( Care Centre in your country, go to your local Philips dealer. Order parts or accessories If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www.philips.com/support.
Recycling English 10 Notices % $ *%+,; This Philips appliance complies with all # $%&* ( to the instructions in this user manual, the evidence available today. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
EN
© 2012 Koninklijke Philips Electronics N.V. All rights reserved.
