Register your product and get support at www.philips.
1 Notice Copyright About Progressive Scan Trademarks 2 Important Safety Product care Disposal of your old product and batteries 3 Your home theater Main unit Remote control 4 Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices Connect a wireless module Connect a microphone 5 Use your home theater Before you start Choose your sound Play a disc Play from a USB storage device More play features Play from radio Play audio from TV or other devices Play from an M
1 Notice Copyright This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Important Read and understand all instructions before you use your home theater. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or re! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products.
u a d b e SETUP Accesses or exits the setup menu. • • c d • t e f s f (Navigation buttons) Navigate menus. In video mode, press left or right to fast backward or fast forward. In radio mode, press left or right to search a radio station; press up or down to ne tune a radio frequency. INFO Displays information about what is playing. g Playback buttons Control playback. r q p g h SURR (Surround Sound) h i AUDIO SYNC • Selects an audio language or channel.
t OK Con rms an entry or selection. 4 u Source buttons • AUDIO SOURCE : Selects an audio • • • input source. RADIO: Switches to FM radio. USB : Switches to USB storage device. DISC: Switches to disc source. Connect your home theater This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide.philips.com.
d DIGITAL IN-COAXIAL Connects to the coaxial audio output on the TV or a digital device. e FM ANTENNA Connects the FM antenna for radio reception. f VIDEO OUT-VIDEO Connects to the composite video input on the TV. Option 2: Connect to the TV through YPbPr (component video) Englis h c AUDIO IN - AUX 1/AUX 2 Connects to the analog audio output on the TV or an analog device. Note • The component video cable or connector might be labeled Y Cb Cr or YUV.
Connect audio from TV or other devices Use your home theater to play audio from the TV or other devices such as a cable box. Option 2: Connect audio through coaxial cable Note • The digital coaxial cable or connector might be labeled COAXIAL/DIGITAL OUT or SPDIF OUT. Tip • Press AUDIO SOURCE repeatedly to select (Cable not supplied) the audio output of your connection.
Use your home theater Change surround sound mode Experience an immersive audio experience with surround sound modes. This section helps you use the home theater to play media from a wide range of sources. Before you start Check that you: • Make the necessary connections and complete the setup as described in the Quick Start. • Switch the TV to the correct source for the home theater. Choose your sound This section helps you choose the ideal sound for your video or music.
Use video options Use karaoke options Access several useful features while viewing video. Access several useful features while playing karaoke disc. Note Note • Available video options depend on the video • Ensure that a microphone (not supplied) is source. Button connected to the MIC connector on this home theater before play. Action Searches slow-backward or slow-forward. Press repeatedly to change the search speed. For VCD/SVCD, slow-backward search is not available.
Several advanced features are available for video or picture playback from a disc or USB storage device. 2 3 4 Select [Repeat] > [ AB] in the menu. Press OK to mark the start point. Press OK again to mark the end point. » Repeat play starts. • To cancel repeat A-B, press INFO, select [Repeat] > [Off], then press OK . Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow. The les must be stored on the same disc or USB storage device.
Change tuning grid In some countries, you can switch the FM tuning grid between 50 kHz and 100 kHz. Changing tuning grid erases all preset radio stations. Press RADIO. Press . Press and hold until ‘GRID 9’ (50 kHz) or ‘GRID 10’ (100 kHz) is displayed. 1 2 3 Play audio from TV or other devices Use Philips EasyLink The home theater supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol.
Create MP3 audio les 6 Use the home theater to convert audio CDs into MP3 audio les. Insert an audio CD (CDDA/HDCD) into the home theater. Connect a USB storage device to the home theater. When audio is played, press CREATE MP3. This section helps you to change the settings of your home theater. 1 2 Englis h Change settings Caution • Many of the settings are already con gured with the best value for the home theater.
Change general settings Change audio settings 1 2 3 1 2 3 Press SETUP. Select [Audio Setup], then press OK . Select and adjust the following settings: • [Speakers Volume] : Sets the volume of each speaker to obtain the ideal audio balance. • [Speakers Delay] : Sets the delay time for center and rear speakers to obtain an equal audio transmission from all the speakers. • [HDMI Audio] : Enables or disables HDMI audio output for the TV.
Change preference settings 1 2 3 Press SETUP. Select [Video Setup], then press OK . Select and adjust the following settings: • [TV System] : Selects a TV system that is compatible with the TV. • [TV Display] : Selects a picture display format to t the TV screen. • [Screen Fit] : Selects a full screen format that best ts to the TV screen. • [Picture Settings] : Selects a prede ned color setting. • [HDMI Setup] : Selects HDMI video resolution and the wide screen display format for the TV.
7 Update software 8 Product specifications To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. Check software version 1 2 Press SETUP. Select [Preference Setup] > [Version Info.], then press OK . » The software version is displayed. Update software from a CD-R or USB 1 2 3 4 5 • Speci cation and design are subject to change without notice.
Speakers • System: full range satellite • Speaker impedance: 3 ohm (center), 4 ohm (Front/Rear) • Speaker drivers: 2 x 3” full range • Frequency response: 150 Hz-20 kHz • Dimensions (WxHxD): • Center: 280 x 95 x 92 (mm) • Speaker : 100 x 280 x 115 (mm) • Tall speaker: 260 x 1101 x 260 (mm) • Weight: • Center: 1.40 kg • Speaker: 1.05 kg/each • Tall speaker: 3.73~3.
9 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product.
10 Index Englis h The contents of a USB storage device cannot be read. • Ensure that the format of the USB storage device is compatible with the home theater (see ‘Product speci cations’ on page 16). • Ensure that the USB storage device is formatted with a le system that is supported by the home theater (note that NTFS is not supported). ‘No entry’ or ‘x’ sign appears on the TV. • The operation is not possible. EasyLink feature does not work.
K R karaoke microphone play 8 10 L language audio disc menu on-screen display subtitle 15 15 14 15 radio play program tune tuning grid recycle region code remote control repeat rotate pictures 11 11 11 12 4 16 5 9, 11 10 S M MP3 create MP3 les play 13 12 O one-touch play one-touch standby overview connectors main unit remote control 12 12 6 4 5 P password picture options slide show thumbnail overview troubleshooting play disc karaoke MP3 player options radio troubleshooting USB storage device
