Register your product and get support at www.philips.
1 Notice Copyright About Progressive Scan Compliance Open source software Trademarks 2 Important Safety Product care Disposal of your old product and batteries 3D health warning 3 Your home theater Main unit Remote control 6 2 2 2 2 2 2 4 4 4 5 5 6 6 6 Change settings 20 20 20 20 21 21 21 22 Access the setup menu Change video settings Change audio settings Set up network Set up EasyLink Change preference settings Change advanced settings 7 Update software Check software version Update software fr
1 Notice Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. About Progressive Scan Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture.
DLNA , the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending.
2 Important Read and understand all instructions before you use your home theater. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
3 Your home theater Remote control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your home theater at www. philips.com/welcome. 1 19 Main unit 2 18 3 4 5 17 6 16 15 a +/Increases or decreases volume. 7 8 9 10 14 b Display panel c (Play/Pause) Starts, pauses or resumes play. d (Stop) Stops play. In radio mode, erases the current preset radio station. e (Eject) Ejects the disc from the disc compartment.
(Standby-On) Switches the home theater on or to standby. • When EasyLink is enabled, press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby. • b (Home) Accesses the home menu. c SOUND SETTINGS Accesses or exits various sound options. d Navigation buttons • Navigates menus. • In radio mode, press left or right to start auto search. e OK • Confirms an entry or selection. f OPTIONS Accesses more play options during playback.
4 Connect your home theater Back connectors This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide. philips.com. Note • Refer to the type plate at the back or bottom of the product for identification and supply ratings.
Connect to the TV Component Video Out English TV Connect your home theater directly to a TV through one of the following connectors (from highest to basic quality video): Component Video In a HDMI b Component video c Composite video Option 1: Connect to the TV through HDMI Note • The HDMI connector on the TV might be labeled HDMI IN or HDMI ARC . • If the TV supports HDMI Audio Return Channel (ARC), you can use it to output digital audio to the home theater.
Connect audio from TV or other devices Use your home theater to play audio from the TV or other devices such as a cable box. Choose from the following connectors. Tip • Press SOURCE repeatedly to select the audio Option 2: Connect audio through coaxial cable Note • The digital coaxial cable or connector might be labeled COAXIAL/DIGITAL OUT or SPDIF OUT. (Cable not supplied) output of your connection.
Software update : update the software of the home theater through the network (see ‘Update software from the network’ on page 23). What you need: • A network router (with DHCP enabled). • A network cable (RJ45 straight cable). • A computer with media server software installed (see ‘Set up media server software’ on page 17 ). • For software update, make sure that the network router has access to the Internet and is not restricted by firewalls or other security systems.
5 Use your home theater Choose your sound This section helps you choose the ideal sound for your video or music. This section helps you use the home theater to play media from a wide range of sources. Before you start Check that you: • Make the necessary connections as described in the Quick Start and User Manual. • Switch the TV to the correct source for the home theater. Access the home menu The home menu gives you easy access to connected devices, audio and video settings, and other features.
Synchronize audio with video Select predefined sound modes to suit your video or music. Press SOUND SETTINGS . Select SOUND, then press OK . Press the Navigation buttons (up/down) to select the following settings: • ACTION/ROCK : Enhanced low and high-range. Ideal for action movies and rock or pop music. • DRAMA /JAZZ : Clear mid and highrange. Ideal for drama movies and jazz music. • CONCERT/CLASSIC: Neutral sound. Ideal for live concerts and classical music.
For video formats such as, DivX and WMV: • To stop play, press . • To resume the video from where you stopped, press (Play). • To play the video from the start, press OK . Note • To play DivX DRM - protected files from a disc or a USB storage device, connect your home theater to a TV through an HDMI cable.
4 Press the play buttons to control play. When you search forward or backward, and in some other play modes, the video displays in 2D. It returns to 3D when you play normally again. Put on the 3D glasses to enjoy the 3D effects. Play 3D discs in 2D 1 2 3 4 Press (Home). Select [Setup] > [Video] > [Blu-ray 3D video] > [Off]. Press OK . Play your Blu-ray 3D disc. » The 3D video is displayed in 2D.
• • • • • [PIP Selection] : Displays Picture-inPicture window. [Zoom] : Zooms into a video scene or picture. Press the Navigation buttons (left/right) to select a zoom factor. [Repeat] : Repeats a chapter or title. [Repeat A-B] : Marks two points within a chapter or track for repeat play, or turns off repeat mode. [Picture Settings] : Selects a predefined color setting. Use picture options Access several useful features while viewing pictures. Press OPTIONS . » The pictures options menu appears.
Before you start: • Connect your home theater to your home network (see ‘Connect to a computer network and the Internet’ on page 10). • Connect your PC to the same home network. • Make sure that your PC firewall allows you to run Windows Media Player programs. In Microsoft Windows Media Player 11 Connect the home theater to a network router (see ‘Connect to a computer network and the Internet’ on page 10). Switch on the computer and router. Open Windows Media Player on the computer.
Button Action Selects a preset radio station. / Navigation Searches for a radio station. buttons (left/right) Navigation Fine tunes a radio frequency. buttons (up/down) Press and hold to erase the preset radio station. Press to stop the installation of radio stations. Manual: Press once to access OPTIONS program mode, and press again to store the radio station. Automatic: Press and hold for five seconds to reinstall radio stations. RADIO Toggles between stereo and mono sound.
Note • On iPod, enable the TV ON setting. • On iPhone, select the TV Out option. 1 2 3 4 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 18). Switch the TV to the AV/VIDEO source (corresponding to the yellow composite cable). » The TV screen goes blank. Browse on the iPod or iPhone screen to select videos or photos. Press (Play) to play the video and photos. » The picture is displayed on the TV.
6 Change settings • This section helps you to change the settings of your home theater. • Caution • Most of the settings are already configured with the best value for the home theater. Unless you have a specific reason to change a setting, it is best to leave it at the default value. • 5 Access the setup menu 1 2 3 4 Press (Home). Select [Setup], then press OK . » The setup menu appears. Select a setup menu, then press OK .
1 2 3 4 5 Press (Home). Select [Setup], then press OK . Select [Network], then press OK . Select and adjust the following settings: • [Network Installation] : Starts wired (Ethernet) or wireless setup. Follow the instructions to set up the network connection. • [View Network Settings] : Displays the current network settings. • [View Wireless Settings] : Displays the current Wi-Fi settings. Press OK to confirm your choice. Set up EasyLink 1 2 3 4 Press (Home). Select [Setup], then press OK .
• [Auto Standby] : Enables or disables auto standby. If enabled, the home theater switches to standby after 30 minutes of inactivity (for example, in pause or stop mode). [VCD PBC] : Displays or skips the content menu for VCD and SVCD discs. [Sleep Timer] : Sets a sleep timer to switch the home theater to standby after a specific time. • • 5 Press OK to confirm your choice.
Update software To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. Check software version 1 2 3 Press (Home). Select [Setup], then press OK . Select [Advanced] > [Version Info.], then press OK . » The software version is displayed. Update software from the network 1 2 3 4 Prepare the internet connection (see ‘Connect to a computer network and the Internet’ on page 10).
8 Product specifications Note • Specification and design are subject to change without notice.
Asia Pacific/Latin America: 110127V/220-240V; ~50-60Hz switchable • Russia/China/India: 220-240V, ~50Hz • Power consumption: 100 W • Standby power consumption: ≤ 0.3 W • Dimensions (WxHxD): 434 x 253 x 129 (mm) • Weight: 3.6 kg Subwoofer • Impedance: 3 ohm • Speaker drivers: 165 mm (6.5”) woofer • Frequency response: 40 Hz-150 Hz • Dimensions (WxHxD): 196 x 395 x 342 (mm) • Weight: 5.
Sound No sound. • Ensure that the audio cables are connected and select the correct input source (for example, SOURCE for the device you want to play. No sound on HDMI connection. • You might not hear any sound if the connected device is not HDCP (Highbandwidth Digital Content Protection) compliant or only DVI compatible. Use an analog or digital audio connection. • Ensure that the [HDMI Audio] is enabled. No sound from TV program.
Network Wireless network not found or distorted. • Ensure that the wireless network is not disturbed by the microwave ovens, dect phones or other Wi-Fi devices in your neighbourhood. • Try the wired network installation if the wireless network does not work properly (see ‘Set up network’ on page 21).
E EasyLink settings F file formats H HDMI CEC (see Easylink) P 19, 21 24 19 I Internet BD-Live connect software update iPod connect play slideshow 14 10 23 10 18 19 L language audio disc menu on-screen display subtitle 15, 21 21 21 15, 21 M media server software set up MP3 play 17 18 network connect set up software update O one-touch play one-touch standby overview connectors main unit remote control EN 10 11 23 19, 21 19, 21 8 6 6 21 16 16 16 , 16 25 14 14 14 15 14 13 16 18 16 13 1
T time search video title troubleshooting TV audio from TV connect 12 13 13 13 26 English sound auto volume mode surround treble and bass troubleshooting subtitle language subtitle shift system audio control 15, 21 15, 21 19 15 15 25 10, 18 9 U USB play software update 15 23 V video options synchronize with audio 15 13 EN 29