Register your product and get support at www.philips.
1 Notice Copyright About Progressive Scan Trademarks 2 3 4 Important Safety Product care 3 3 3 Disposal of your old product and batteries 4 Your home theater Main unit Remote control 5 Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices 6 Use your home theater Before you start Choose your sound Play a disc Play from radio Play audio from TV or other devices Play from a USB storage device Play from an iPod or iPhone More play features for disc or USB Use
1 Notice Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. About Progressive Scan Consumers should note that not all high de nition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture.
Important Read and understand all instructions before you use your home theater. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or re! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
3 Disposal of your old product and batteries 4 Your home theater Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips offers, register your home theater at www. philips.com/welcome. Main unit Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.
a c Source buttons • DISC: Switches to disc source. • USB: Switches to USB storage device. • RADIO: Switches to FM radio. • AUDIO SOURCE : Selects an audio b • c d t e s r d g • • • f input source. DOCK for iPod: Switches to Philips Dock for iPod/iPhone. SETUP Accesses or exits the setup menu. e f Engl i s h Remote control (Navigation buttons) Navigate menus. In video mode, press left or right to fast backward or fast forward.
p SURROUND Switches to surround sound or stereo sound. q +/Increases or decreases volume. r (Mute) Mutes or restores volume. s BACK Returns to a previous menu screen. t OK 5 Connect your home theater This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide. philips.com. Con rms an entry or selection.
Option 1: Connect to the TV through HDMI Engl i s h Back connectors Note • If the HDTV has a DVI connector, connect using an HDMI/DVI adapter. • If the TV supports EasyLink HDMI CEC, control the home theater and TV with one remote control (see ‘Use Philips EasyLink’ on page 12). (Cable not supplied) a HDMI OUT b c d e f g h i Connects to the HDMI input on the TV. VIDEO OUT - Pr Pb Y Connects to the component video input on the TV. VIDEO OUT - VIDEO Connects to the composite video input on the TV.
Option 3: Connect to the TV through composite video (CVBS) Note 2 1 • The composite video cable or connector might be labeled AV IN , VIDEO IN , COMPOSITE or BASEBAND. TV Option 2: Connect audio through coaxial cable Note Connect audio from TV or other devices Use your home theater to play audio from the TV or other devices such as a cable box. Choose from the following connectors. Tip the audio output of your connection.
Use your home theater Change virtual surround mode DVS (Dolby Virtual Speaker) technology creates a highly compelling 5.1-channel listening experience from as few as two speakers. Engl i s h 6 This section helps you use the home theater to play media from a wide range of sources. Before you start Check that you: • Make the necessary connections and complete the setup as described in the Quick Start. • Switch the TV to the correct source for the home theater.
Use video options Access several useful features while viewing video. Note • Available video options depend on the video source. Button Action Searches slow-backward or slow-forward. Press repeatedly to change the search speed. For VCD/SVCD, slow-backward search is not available. AUDIO Selects an audio language or SYNC channel. SUBTITLE Selects subtitle language for video. Displays information about what INFO is playing. REPEAT Repeats a chapter or title.
Dock your iPod or iPhone 1 Connect the dock to the home theater and connect the yellow composite cable from the dock to the TV. For more information, see the Quick Start provided with the dock. Switch on the iPod or iPhone and place it in the dock. Press AUDIO SOURCE repeatedly to select the audio output of the connected device (see ‘Connect audio from TV or other devices’ on page 8).
More play features for disc or USB Several advanced features are available for video or picture playback from a disc or USB storage device. Use Philips EasyLink The home theater supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Note Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow.
Change settings This section helps you to change the settings of your home theater. Caution Change general settings 1 2 3 Press SETUP. Select [General Setup], then press OK . Select and adjust the following settings: • [EasyLink Setup] : Sets up EasyLink to enjoy easy controls of all the HDMI CEC compliant devices using a single remote control (see ‘Use Philips EasyLink’ on page 12). • [Disc Lock] : Restricts play to disc. Password (PIN code) is required to unlock the disc before play.
Change audio settings Change video settings 1 2 3 Press SETUP. Select [Audio Setup], then press OK . Select and adjust the following settings: • [Night Mode] : Selects quiet or full dynamic sound. Night mode decreases the volume of loud sounds and increases the volume of soft sounds such as speech. • [HDMI Audio] : Enables or disables HDMI audio output for the TV. • [CD Upsampling] : Converts the music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.
Change preference settings 8 1 2 3 To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. 4 Press OK to con rm your choice. Note • If your preferred disc language is not available, you can select [Other] from the list and enter the 4-digit language code which can be found at the back of this manual.
9 Product specifications Note • Speci cation and design are subject to change without notice. Region code The type plate on the back or bottom of the home theater shows which regions it supports Country DVD Europe, United Kingdom Asia Pacific, Taiwan, Korea Latin America Australia, New Zealand Russia, India China Playback media DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX-CD, USB storage device File Format • Audio: .mp3, .
• • • System: full range satellite Speaker impedance: 6 ohm Speaker drivers: 1 x 76 mm (3”) woofer + 25 mm (1”) tweeter • Frequency response: 150 Hz-20 kHz • Dimension (WxHxD): 114 x 316 x 114 (mm) • Weight: 1.03 kg • Cable length: 2 m Laser speci cation • Type: Semiconductor laser GaAIAs (CD) • Wave length: 645 - 665 nm (DVD), 770 800 nm (CD) • Output power: 6 mW (DVD), 7 mW (VCD/CD) • Beam divergence: 60 degrees. 10 Troubleshooting Engl i s h Speakers Warning • Risk of electric shock.
Sound No sound. • Ensure that the audio cables are connected and select the correct input source (for example, AUDIO SOURCE ) for the device you want to play. No sound on HDMI connection. • You might not hear any sound if the connected device is not HDCP (Highbandwidth Digital Content Protection) compliant or only DVI compatible. Use an analog or digital audio connection. • Ensure that the [HDMI Audio] is enabled. No sound from TV program.
A ampli er audio connection language synchronize with video audio input mapping 16 8 15, 10 12 12 C care change settings connect audio from TV guide other devices TV connectors contact us 3 13 8 , 11 6 8 7 6 17 D disc play supported discs disposal of your product DivX registration code subtitle 9 16 4 13 15 E EasyLink settings 16 H HDMI CEC (see Easylink) 15 15 13 15 O one-touch play one-touch standby overview connectors main unit remote control 12 12 6 4 5 P password picture options slide show
S safety settings general parental control preferences restore factory settings video slideshow play musical slideshow software update version sound mode treble and bass troubleshooting subtitle language system audio control 3 13 15 15 15 14 12 15 15 9 9 18 10 12 T time search video troubleshooting TV audio from TV connect 12 17 8 , 11 7 U USB play 11 V video options settings synchronize with audio video on demand (VOD) 20 EN 10 14 12 13
? ?
PHILIPS CONSUMER ELECTRONICS WARRANTY POLICY FOR AUSTRALIA Philips provides the following Consumer Electronics products with a 1 Year Manufacturers Warranty:Players, DVD Recorders, DVD Recorders with Hard Disk, Personal Video Recorders, Audio Systems, Wireless Audio Systems, Home Theatre systems, Digital Set Top Box, Digital Photo Display, MP3 players & Portable Audio products. st October 2007, are supported by a 3 Year Manufacturers Warranty.
Free Replacement – at your Retailer For Digital Photo Frames or any product with a purchase price of less than $250, please return the faulty product to the place of purchase. The retailer will arrange a replacement product for you. If your Philips product develops a fault outside of the warranty period, please contact a Philips Authorised Service Centre on 1300 361 392 a. All claims for warranty service should be made to your nearest Philips Authorised Service Centre or the Philips Technology Care Centre.
Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 中文 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 68
© 2010 Koninklijke Philips Electronics N.V. All rights reserved.
