Registre seu produto e obtenha suporte em www.philips.
Responsabilidade Social A Philips do Brasil LTDA é uma empresa socialmente responsável, preocupada com a valorização dos seus recursos humanos internos, com o relacionamento correto e justo com a comunidade, com o meio ambiente, com o ambiente de trabalho e com o compromisso de cumprimento das leis.
Contents 2 3 4 5 Change settings 15 15 15 15 16 16 16 17 Access the setup menu Change video settings Notice 2 Change audio settings Copyright 2 Set up network Open source software 2 Set up EasyLink Trademarks 2 Change preference settings Change advanced settings Important 3 Safety 3 7 Update software Product care 4 Check software version Health warning 4 Update software from the network Disposal of your old product and batteries 4 Update software from a USB Yo
1 Notice Trademarks Copyright “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of Blu-ray Disc Association. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
2 ® HDMI, and HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT Read and understand all instructions before you use your home theater. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! •• Never expose the product and accessories to rain or water.
•• For speakers with stands, use only the supplied stands. Secure the stands to the speakers tightly. Place the assembled stands on flat, level surfaces that can support the combined weight of the speaker and stand. •• Never place the product or any objects on power cords or on other electrical equipment. •• If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet.
3 Your home theater Remote control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your home theater at www.philips.com/welcome. 1 2 Main unit 6 7 8 9 21 3 20 4 Eng lis h 5 6 a Disc compartment b (Open/Close) Opens or closes the disc compartment. c (Play/Pause) Starts, pauses or resumes play. d (Stop) • Stops play. • In radio mode, erases the current preset radio station.
b (Home) Accesses the home menu. s c TOP MENU Accesses the main menu of a video disc. d (Options) Accesses more play options during playback. • In radio mode, programs radio stations. • e Navigation buttons • Navigates menus. • In radio mode, press left or right to t (Stop) Stops play. Press and hold to eject the disc or open the disc compartment. • In radio mode, erases the current preset radio station. • • (Back) Returns to a previous menu screen.
Connect your home theater This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide.philips.com. Note •• Refer to the type plate at the back or bottom of the product for identification and supply ratings. •• Before you make or change any connections, ensure that all devices are disconnected from the power outlet.
Option 2: Connect to the TV through composite video (CVBS) Note •• The composite video cable or connector might be labeled AV IN, VIDEO IN, COMPOSITE or BASEBAND. TV Connect audio from TV or other devices Use your home theater to play audio from the TV or other device such as a cable box. Tip •• Press AUDIO SOURCE to select the audio output of your connection.
1 2 3 4 5 6 7 8 9 Connect the home theater to a broadband modem or router (see ‘Connect to the internet’ on page 8). Turn on your TV and switch to the correct source for the home theater. Press (Home). Select [Setup], then press OK. Select [Network] > [Network Installation], then press OK. Select [Wired (Ethernet)], then press OK. Select [Auto (recommended)] or [Manual (advanced)], then press OK. Follow the instructions on the TV to complete the setup. »» The home theater connects to the internet.
Choose your sound This section helps you choose the ideal sound for your video or music. • 4 SPORTS : Moderate mid-range and surround effects for clear vocals and the atmosphere of a live sport venue. Press OK to confirm your choice. Change surround sound mode 1 2 Press (Sound options). Press the Navigation buttons (left/right) to access the sound options. Sound experience Description SOUND SURROUND Selects a sound mode. Selects a surround sound or stereo sound.
Play a disc 3 The home theater can play a wide variety of discs, including video, audio and mixed media (for example, a CD-R that contains JPEG pictures and MP3 music). Insert a disc into the home theater. Press DISC, or select [play Disc] in the home menu and press OK. »» The disc plays or the disc main menu appears. 4 3 Press the following buttons to control play: Button Action Navigation buttons OK (Play) Navigate menus.
Play 3D video Your home theater can play 3D videos on 3D TVs. Before you start, make sure that: •• your TV is a 3D TV, and is connected to your home theater through HDMI, •• your disc is a Blu-ray 3D disc, and •• you have 3D glasses that are compatible with your 3D TV. To play 3D video Insert a Blu-ray 3D disc into your home theater. »» Your TV switches to the correct HDMI source, and the disc plays automatically.
• • • • [PIP Selection] : Displays Picture-inPicture window. [Zoom] : Zooms into a video scene or picture. Press the Navigation buttons (left/right) to select a zoom factor. [Repeat] : Repeats a chapter or title. [Repeat A-B] : Marks two points within a chapter or track for repeat play, or turns off repeat mode. [Picture Settings] : Selects a predefined color setting. Use picture options Access several useful features while viewing pictures. Press (Options). »» The pictures options menu appears.
Change tuning grid Use Philips EasyLink In some countries, you can switch the FM tuning grid between 50 kHz and 100 kHz. Changing the tuning grid erases all preset radio stations. Press RADIO. Press (Stop). Press and hold (Play) to toggle between 100 kHz and 50 kHz frequency. The home theater supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLinkcompliant devices that are connected through HDMI connectors can be controlled by a single remote control.
6 Change settings • This section helps you to change the settings of your home theater. Caution •• Most of the settings are already configured with the best value for the home theater. Unless you have a specific reason to change a setting, it is best to leave it at the default value. • 5 [Blu-ray 3D video] : Selects the 3-dimensional video output when you play a 3D video on your home theater. The home theater must be connected to a 3D TV through HDMI.
Set up network 1 2 3 4 5 Press (Home). Select [Setup], then press OK. Select [Network], then press OK. Select and adjust the following settings: • [Network Installation] : Starts wired (Ethernet) setup. Follow the instructions to set up the network connection. • [View Network Settings] : Displays the current network settings. Press OK to confirm your choice. Note •• The connected devices must be connected through HDMI and switched on.
•• If your preferred disc language is not available, you can select [Other] from the list and enter the 4-digit language code which can be found at the back of this manual. •• If you select a language that is not available on a disc, the home theater uses the default language of the disc. Change advanced settings 1 2 3 4 5 Press (Home). Select [Setup], then press OK. Select [Advanced], then press OK. Select and adjust the following settings: • [BD-Live Security] : Restricts or allows access to BD-Live.
Update software from a USB 1 2 3 4 5 6 7 8 8 Product specifications Check for the latest software version on www.philips.com/support. • Search for your model and click on ‘software and drivers’. Create a folder named ‘UPG’ in the root directory of your USB storage device. Download the software into the ‘\UPG’ folder of the USB storage device. Unzip the software in the ‘\UPG’ folder. Connect the USB storage device to the home theater. Press (Home) and select [Setup].
•• Dimensions (WxHxD): 123 x 309 x 369 (mm) •• Weight: 3.81 kg •• Cable length: 4 m Speakers •• Total output power: 133 W RMS (10% THD) per channel •• System: full range satellite •• Speaker impedance: 4 ohm (center), 4 ohm (Front/Rear) •• Speaker drivers: 1 x 3” full range •• Frequency response: 150 Hz-20 kHz •• Dimensions (WxHxD): • Center: 161 x 92 x 95 (mm) • Speaker : 95 x 161 x 87 (mm) • Tall speaker (For HTS3580 only): 254 x 1001 x 254 (mm) •• Weight: • Center: 0.77 kg • Speaker: 0.
9 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product.
Ensure that the USB storage device is formatted with a file system that is supported by the home theater. ‘No entry’ or ‘x’ sign appears on the TV. •• The operation is not possible. EasyLink feature does not work. •• Ensure that the home theater is connected to a Philips brand EasyLink TV and that EasyLink is on. I do not want my home theater to be switched on when I switch on my TV. •• This is the correct behavior for Philips EasyLink (HDMI-CEC).
I Internet BD-Live 11 L language audio disc menu on-screen display subtitle 12, 16 16 16 12, 16 M MP3 play 14 N network set up O one-touch play one-touch standby overview connectors main unit remote control P password (PIN code) picture options rotate slide show troubleshooting picture-in-picture 2nd audio language 2nd subtitle language enable play 2D video 3D video disc MP3 player options radio troubleshooting USB storage device product care product specifications 9 14, 16 14, 16 7 5 5 16
Seja Responsável Respeite os direitos autorais Especificações sujeitas a alteração sem aviso prévio. Marcas comerciais são propriedade de Koninklijke Philips Electronics N.V. ou de seus respectivos proprietários. © 2010 Koninklijke Philips Electronics N.V. All rights reserved.
