Software Upgrade

ManualsBrandsPhilips Manualshome cinema systemsHTS3548W/98

1 of 4

1 Introduction

The upgrade version of this software is Version 00.28.00

This software can be used to upgrade the following Philips DVD Home Theater

Systems:

 HTS3548/98

 HTS3548W/93

 HTS3548W/98

After you have completed the upgrade procedure, your DVD player will typically

perform better. What improvements are made depends on the upgrade software

you are using as well as the software that your DVD player contained before the

upgrade.

2 Key Features

This software version includes:

 Fix for losing settings when powering off from mains.

 Allows for chinese language selection in SETUP Menu

3 Preparations

You will need the following items:

 Personal Computer

 CD-R/RW drive and writing application software

 1x blank CD-R

4 Software Version Verification Procedure

It‟s important to write down the Software Version information of your DVD player

before you start the upgrade procedure. This information is also useful in case

you need to call Philips Customer Care Center.

1. POWER ON the set

2. Press OPEN/CLOSE key to open the disc tray on the remote or on

the set

3. Press DISPLAY on the remote

5 Download Software

1. Click the link to download Firmware upgrade to your PC.

2. Unzip the .zip file

i) Do not rename the filename

Summary of content (4 pages)

PAGE 1
Introduction The upgrade version of this software is Version 00.28.00 This software can be used to upgrade the following Philips DVD Home Theater Systems:  HTS3548/98  HTS3548W/93  HTS3548W/98 After you have completed the upgrade procedure, your DVD player will typically perform better. What improvements are made depends on the upgrade software you are using as well as the software that your DVD player contained before the upgrade.
PAGE 2
Philips Electronics Singapore ii) 6 Software Upgrade Instruction Visit http://www.winzip.com/ for downloads if you cannot open the .zip file. Burning upgrade software on CD-R or CD-RW 1. Extract the files by unzipping the zipped file. 2.
PAGE 3
Philips Electronics Singapore Software Upgrade Instruction 4. Select the unzipped files 5. Click “Add” and “Finished”. 6. Click on “Next” and follow by “Burn”. The firmware upgrade will now be burned onto the disc. Using Easy CD Creator 1. Insert a blank CD-R or CD-RW disc 2. Open Easy CD Creator 3. Select the unzipped files from the browser on top. 4. Click “Add” to copy the files below. 5. Select “Record CD” in the „File‟ menu. 6.
PAGE 4
Philips Electronics Singapore Software Upgrade Instruction 6. The set will automatically close the disc tray and go to standby mode once the upgrade is completed. 7. Press Standby button to turn on the set. 8. Caution: Do not unplug or power off the set while upgrading in progress. 8 After the upgrade Do check the change in the Software Version to confirm the upgrade. Please follow the procedure described in the Section 4.