Register your product and get support at www.philips.
1 Notice Copyright Compliance Mains fuse (UK only) Trademarks 2 Important Safety Product care Disposal of your old product and batteries 3 Your home theater Main unit Remote control 4 Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices 5 Use your home theater Before you start Choose your sound Play a disc Play from a USB storage device More play features for disc or USB Play from radio Play audio from TV or other devices Create MP3 audio les 6 Change set
1 Notice Trademarks Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Copyright in the UK Recording and playback of material may require consent. See Copyright Act 1956 and The Performers Protection Acts 1958 to 1972.
The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, inc. CLASS 1 LASER PRODUCT Important English 2 Read and understand all instructions before you use your home theater. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or re! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
• Never place the product or any objects on power cords or on other electrical equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. • Visible and invisible laser radiation when open. Avoid exposure to beam. • Do not touch the disc optical lens inside the disc compartment. Risk of overheating! • Never install this product in a con ned space.
Your home theater Remote control Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips offers, register your home theater at www.philips.com/welcome. Main unit English 3 a b v c d u a Disc compartment b (Open/Close) Opens or closes the disc compartment. c (Play/Pause) Starts, pauses or resumes play. d (Stop) • Stops play. • In radio mode, erases the current preset radio station. e (Standby-On) Switches the home theater on or to standby.
e • • • f (Navigation buttons) Navigate menus. In video mode, press left or right to fast backward or fast forward. In radio mode, press left or right to search a radio station; press up or down to ne tune a radio frequency. INFO Displays information about what is playing. g Playback buttons Control playback. h SURR (Surround Sound) Switches to surround sound or stereo sound. i AUDIO SYNC • Selects an audio language or channel. • Press and hold to synchronize audio with video. Use with +/-.
Connect your home theater This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide. philips.com. d HDMI OUT Connects to the HDMI input on the TV. English 4 e VIDEO OUT Connects to the composite video input on the TV. f AUDIO IN-AUX Connects to the analog audio output on the TV or an analog device.
Option 2: Connect to the TV through Scart (Cable not supplied) TV 5 Use your home theater This section helps you use the home theater to play media from a wide range of sources. Before you start Option 3: Connect to the TV through composite video (CVBS) Check that you: • Make the necessary connections and complete the setup as described in the Quick Start. • Switch the TV to the correct source for the home theater.
Use video options Experience an immersive audio experience with surround sound modes. Access several useful features while viewing video. Note • Available video options depend on the video source. Press SURR repeatedly to cycle through the available surround modes. Option Description MULTICHANNEL Immersive multi-channel sound for an enhanced movie experience. Two-channel stereo sound. Ideal for listening to music. STEREO Play a disc Button Action Searches slow-backward or slow-forward.
Play from a USB storage device The home theater is tted with a USB connector that allows you to view pictures, listen to music or watch movies stored on a USB storage device. Connect the USB storage device to the home theater. Press USB . » A content browser appears. Select a le, then press OK . Press the playback buttons to control play (see ‘Play a disc’ on page 9). 1 2 3 4 Note • If the USB storage device does not t into the connector, use a USB extension cable.
Press AUDIO SOURCE repeatedly to select the audio output of the connected device . 8 Select [Start] in the menu to convert, then press OK . » A new folder is created in the USB storage device to store all the new MP3 audio les. • To exit the menu, select [Exit] and press OK . Create MP3 audio les Note Use the home theater to convert audio CDs into MP3 audio les. Insert an audio CD (CDDA/HDCD) into the home theater. Connect a USB storage device to the home theater.
6 Change settings This section helps you to change the settings of your home theater. Caution Change general settings 1 2 3 • Most of the settings are already con gured with the best value for the home theater. Unless you have a speci c reason to change a setting, it is best to leave it at the default value. Access the setup menu 1 Press SETUP. » The following menu appears. Symbol Description [General Setup] [Audio Setup] [Video Setup] [Preference Setup] 2 3 Select a setup menu, then press OK .
• 4 [HDMI Audio] : Enables or disables HDMI audio output for the TV. [Audio Sync] : Sets a delay for audio output when you play a video disc. Press OK to con rm your choice. Change preference settings 1 2 3 Press SETUP. Select [Preference Setup], then press OK . Select and adjust the following settings: • [Audio] : Selects audio language for video. • [Subtitle] : Selects subtitle language for video. • [Disc Menu] : Selects menu language for video disc.
7 Update software To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. Check software version 1 2 Press SETUP. Select [Preference Setup] > [Version Info.], then press OK . » The software version is displayed. Update software from a CD-R or USB 1 2 3 4 Product specifications Note • Speci cation and design are subject to change without notice.
• Weight: HTS3510: 0.68 kg HTS3520: • Center: 0.77 kg • Front/Rear: 0.56 kg/each • Cable length: • Center: 3 m • Front: 4 m • Rear: 10 m Laser speci cation • Type: Semiconductor laser GaAIAs (CD) • Wave length: 645 - 665 nm (DVD), 770 800 nm (CD) • Output power: 6 mW (DVD), 7 mW (VCD/CD) • Beam divergence: 60 degrees. EN English Video • Signal system: PAL / NTSC • HDMI output: 480i/576i, 480p/576p, 720p, 1080i, 1080p Audio • Sampling frequency: • MP3: 32 kHz, 44.1 kHz, 48 kHz • WMA: 44.
9 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product.
A ampli er audio connection language settings synchronize with video 14 8 13, 9 12 10 C care change settings connect audio from TV guide other devices TV connectors contact us 4 12 8 , 11 7 8 7 7 16 D disc play supported discs disposal of your product DivX subtitle 9 14 4 13 F le formats 14 L language audio disc menu on-screen display subtitle 13 13 12 13 M MP3 create MP3 les 11 password picture options slide show thumbnail overview troubleshooting play disc options radio troubleshooting USB s
T time search video troubleshooting TV audio from TV connect 10 16 8 , 11 7 U USB play software update 10 14 V video options settings synchronize with audio 18 EN 9 13 10
