Software Upgrade

Firmware Upgrade

This upgrade is applicable for the following models:

HTS3367/05

HTS3367/12

HTS3366/98

HTS3366/93

HTS3365/55

HTS3366/51

HTS3365x/78

This firmware version improves: Click here for more details

Note: Before you proceed to upgrade, please be reminded that you need to do configuration again

each time after firmware upgrade!

Upgrade Procedure

Check your current version

It’s important to write down the Software Version information of your HTS before you start the

upgrade procedure. This information is also useful in case you need to call Philips Customer Care

Center.

1. Press OPTIONS to select the { Preferences } menu.

2. Select { Version Info }, and press OK to check the software version of this unit.

3. Compare the software version for this upgrade (Version: 00.35.00, MCU: V10.10) with

the version on your set. If this upgrade version is later than the version on your set, proceed

to Step 2.

Download Firmware upgrade

Click the link to download the new firmware package on your computer. The package is compressed

into a single ZIP archive.

Note: There are 2 methods to upgrade your home theater system.

Step 1

Step 2

HTS336x Firmware Upgrade

PAGE 1
HTS336x Firmware Upgrade Firmware Upgrade This upgrade is applicable for the following models: HTS3367/05 HTS3367/12 HTS3366/98 HTS3366/93 HTS3365/55 HTS3366/51 HTS3365x/78 This firmware version improves: Click here for more details Note: Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware upgrade! Upgrade Procedure Step 1 Check your current version It’s important to write down the Software Version information of your HTS before you start the
PAGE 2
1. For Optical Disc upgrade, follow STEP 3 to STEP 4. 2. For USB upgrade, follow STEP 5. Step 3 Burning Upgrade on CD-R / CD-RW 1. 2. 3.
PAGE 3
4. 5. 6. When the HTS displays “No USB” on screen, insert the USB flash storage device which contains the upgrading file. A dialogue will now appear - follow the instructions to update the software of your HTS. The set will go into standby mode after the upgrade is completed. Then you may remove the USB flash storage device. Caution: Do not unplug or power off the set while upgrading in progress. Note: Please make sure you delete the upgrade file from the USB device before using it on the player again.