Register your product and get support at www.philips.
1 Notice Copyright Compliance Mains fuse (UK only) Trademarks 2 Important Safety Product care Disposal of your old product and batteries 3 Your home theater Main unit Remote control 4 Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices Connect a Philips Dock for iPod/iPhone 5 Use your home theater Before you start Choose your sound Play a disc Play from a USB storage device More play features Play from radio Play audio from TV or other devices Play from an
1 Notice Copyright This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
DivX® and DivX Ultra® are registered trademarks of DivX, Inc. and are used under license. DivX Ultra® Certified to play DivX® video with advanced features and premium content. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www. divx.com for more information and software tools to convert your files into DivX video.
• For speakers with stands, use only the supplied stands. Secure the stands to the speakers tightly. Place the assembled stands on flat, level surfaces that can support the combined weight of the speaker and stand. • Never place the product or any objects on power cords or on other electrical equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet.
Your home theater Remote control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your home theater at www. philips.com/welcome. a Main unit c English 3 b d t e s a Display panel b +/Increases or decreases volume. c SOURCE Selects an audio/video source for the home theater. d (Standby-On) Switches the home theater on or to standby. e (Play/Pause) Starts, pauses or resumes play. f (Stop) • Stops play.
c Source buttons • DISC: Switches to disc source. • USB: Switches to USB storage device. • RADIO: Switches to FM radio. • AUDIO SOURCE: Selects an audio • d SETUP Accesses or exits the setup menu. e • • • f input source. DOCK for iPod: Switches to Philips Dock for iPod/iPhone. (Navigation buttons) Navigate menus. In video mode, press left or right to fast backward or fast forward. In radio mode, press left or right to search a radio station; press up or down to fine tune a radio frequency.
Connect your home theater Back connectors English 4 This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide. philips.com. a TO SUBWOOFER Note • Refer to the type plate at the back or bottom of the product for identification and supply ratings.
Option 3: Connect to the TV through composite video (CVBS) Connect to the TV Connect your home theater directly to a TV through one of the following connectors (from highest to basic quality video): Note • The composite video cable or connector might a HDMI be labeled AV IN, VIDEO IN, COMPOSITE or BASEBAND. b Scart c Composite video Option 1: Connect to the TV through HDMI TV Note • If the HDTV has a DVI connector, connect using an HDMI/DVI adapter.
Note • The digital coaxial cable or connector might be labeled COAXIAL/DIGITAL OUT or SPDIF OUT. 5 Use your home theater English Option 2: Connect audio through coaxial cable This section helps you use the home theater to play media from a wide range of sources. Before you start (Cable not supplied) TV Check that you: • Make the necessary connections and complete the setup as described in the Quick Start. • Switch the TV to the correct source for the home theater.
Change surround mode 3 DVS (Dolby Virtual Speaker) technology creates a highly compelling 5.1-channel listening experience from as few as two speakers. Button Action Navigation buttons OK Navigate menus. Press the following buttons to control play: / Press SURROUND to switch on or off virtual surround sound. / Change treble or bass Change the high frequency (treble) or low frequency (bass) settings of the home theater to suit your video or music. ZOOM Confirms an entry or selection.
Access several useful features while viewing pictures. Button / / REPEAT INFO Action Rotates the picture counterclockwise or clockwise. Skips to the previous or next picture. Repeats a single file in the folder or repeats the entire folder. Shuffles files in a folder. Displays photo albums in a thumbnail overview. Use audio options Access several useful features while audio is played.
Repeat play a speci c section Select sections of audio or video for repeat playback. During playback, press INFO. Select [Repeat] > [Repeat AB] in the menu. Press OK to mark the start point. Press OK again to mark the end point. » Repeat play starts. • To cancel repeat A-B, press INFO, select [Repeat] > [Off], then press OK. 1 2 3 4 Play audio from TV or other devices Press AUDIO SOURCE repeatedly to select the audio output of the connected device .
Use Philips EasyLink 6 The home theater supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLinkcompliant devices that are connected through HDMI connectors can be controlled by a single remote control. This section helps you to change the settings of your home theater. English Change settings Caution • Many of the settings are already configured with the best value for the home theater.
Change general settings Change audio settings 1 2 3 1 2 3 Press SETUP. Select [Audio Setup], then press OK. Select and adjust the following settings: • [HDMI Audio] : Enables or disables HDMI audio output for the TV. 4 Press OK to confirm your choice. 4 Press SETUP. Select [General Setup], then press OK.
Change preference settings 7 1 2 3 To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. 4 Press OK to confirm your choice. Note • If you select a language that is not available on a disc, the home theater uses the default language of the disc. • You cannot reset disc lock, password (PIN code) and parental control settings to their default values. Check software version 1 2 Press SETUP.
8 Product specifications Note • Specification and design are subject to change without notice. Region code Country DVD Europe, United Kingdom Asia Pacific, Taiwan, Korea Latin America Australia, New Zealand Russia, India China Playback media DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX-CD, USB storage device File Format • Audio: .mp3, .wma • Video: .divx, .divx ultra, .mpeg, .mpg, .wmv (simple profile) • Picture: .jpeg, .
9 Troubleshooting English Speakers • System: full range satellite • Impedance: 8 ohm • Speaker drivers: 2 x 3” woofer + 2” tweeter • Frequency response: 150 Hz-20 kHz • Dimensions (WxHxD): 112 x 309.5 x 112 (mm) • Weight: 1 kg/each • Cable length: 2 m Laser speci cation • Type: Semiconductor laser GaAIAs (CD) • Wave length: 645 - 665 nm (DVD), 770 800 nm (CD) • Output power: 6 mW (DVD), 7 mW (VCD/CD) • Beam divergence: 60 degrees. Warning • Risk of electric shock. Never remove the casing of the product.
Sound No sound. • Ensure that the audio cables are connected and select the correct input source (for example, AUDIO SOURCE) for the device you want to play. No sound on HDMI connection. • You might not hear any sound if the connected device is not HDCP (Highbandwidth Digital Content Protection) compliant or only DVI compatible. Use an analog or digital audio connection. • Ensure that the [HDMI Audio] is enabled. No sound from TV program.
A ampli er audio connection language settings synchronize with video audio input mapping 16 8 15, 10 14 11 13 C care change settings connect audio from TV guide other devices TV connectors contact us 4 13 8, 12 7 8 8 7 17 D disc play supported discs disposal of your product DivX registration code subtitle 10 16 4 14 15 E EasyLink settings 13 F le formats 13 I iPod connect play 15 15 14 15 M MP3 play 12 O one-touch play one-touch standby overview connectors main unit remote control 13 13 7 5
S safety settings audio general parental control preferences restore factory settings software update version sound mode treble and bass troubleshooting subtitle language system audio control 3 14 14 15 15 15 15 15 9 10 18 10 13 T time search video troubleshooting TV audio from TV connect 11 17 8, 12 8 U USB play software update 11 15 V video options settings synchronize with audio video on demand (VOD) 20 EN 10 14 11 14
