Register your product and get support at www.philips.
1 Notice Copyright Trademarks 2 Important Safety Product care Disposal of your old product and batteries 3 Your home theater Main unit Remote control 4 Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices 5 Use your home theater Before you start Choose your sound Play a disc Play from a USB storage device More play features for disc or USB Play from radio Play audio from TV or other devices Play from an MP3 player Play from an iPod or iPhone Use Philips Easy
1 Notice Copyright This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Important Read and understand all instructions before you use your home theater. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products.
a c Source buttons • DISC: Switches to disc source. • USB: Switches to USB storage device. • RADIO: Switches to FM radio. • AUDIO SOURCE: Selects an audio b • c d t e s r d g • • • f input source. DOCK for iPod: Switches to Philips Dock for iPod/iPhone. SETUP Accesses or exits the setup menu. e f English Remote control (Navigation buttons) Navigate menus. In video mode, press left or right to fast backward or fast forward.
p SURROUND Switches to surround sound or stereo sound. q +/Increases or decreases volume. r (Mute) Mutes or restores volume. s BACK Returns to a previous menu screen. t OK 4 Connect your home theater This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide. philips.com. Confirms an entry or selection.
Connect to the TV English Back connectors Connect your home theater directly to a TV through one of the following connectors (from highest to basic quality video): a HDMI b Composite video a TO SUBWOOFER Option 1: Connect to the TV through HDMI Connects to the supplied subwoofer. b SPEAKERS Connects to the supplied speakers. c FM ANTENNA Connects the FM antenna for radio reception. d AUX IN Connects to the analog audio output on the TV or an analog device.
Connect audio from TV or other devices Use your home theater to play audio from the TV or other devices such as a cable box. 5 Use your home theater This section helps you use the home theater to play media from a wide range of sources. Tip • Press AUDIO SOURCE repeatedly to select Before you start the audio output of your connection. Option 1: Connect audio through analog audio cables Check that you: • Make the necessary connections and complete the setup as described in the Quick Start.
DVS (Dolby Virtual Speaker) technology creates a highly compelling 5.1-channel listening experience from as few as two speakers. Play a disc English Change surround mode The home theater can play a wide variety of discs, including video, audio and mixed media (for example, a CD-R that contains JPEG pictures and MP3 music). Insert a disc into the home theater. Press DISC. » The disc plays or the disc main menu appears. 1 2 Press SURROUND to switch on or off virtual surround sound.
Use video options Access several useful features while viewing video. Note 2 source. Action Searches slow-backward or slow-forward. Press repeatedly to change the search speed. For VCD/SVCD, slow-backward search is not available. AUDIO Selects an audio language or SYNC channel. SUBTITLE Selects subtitle language for video. Displays information about what INFO is playing. REPEAT Repeats a chapter or title. ANGLE Displays options for different camera angles.
If the audio and video are not synchronized, you can delay the audio to match the video. Press and hold AUDIO SYNC until the audio sync message appears on the display panel. Press +/- within five seconds to sync the audio with your video. 1 2 Quick skip play to a specific time Quick skip to a specific part of a video by entering the time of a scene. During video play, press INFO. Press the Navigation buttons and OK to select: • [TT Time] : Title time. • [Ch Time] : Chapter time. • [Disc Time] : Disc time.
Play audio from TV or other devices Press AUDIO SOURCE repeatedly to select the audio output of the connected device . Use Philips EasyLink The home theater supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Play from an MP3 player Connect and play audio files from an MP3 player or other external audio devices.
Change settings This section helps you to change the settings of your home theater. Caution Change general settings 1 2 3 Press SETUP. Select [General Setup], then press OK. Select and adjust the following settings: • [EasyLink Setup] : Sets up EasyLink to enjoy easy controls of all the HDMI CEC compliant devices using a single remote control (see ‘Use Philips EasyLink’ on page 12). • [Disc Lock] : Restricts play to disc. Password (PIN code) is required to unlock the disc before play.
Change audio settings Change preference settings 1 2 3 Press SETUP. Select [Audio Setup], then press OK. Select and adjust the following settings: • [HDMI Audio] : Enables or disables HDMI audio output for the TV. 1 2 3 4 Press OK to confirm your choice. Press SETUP. Select [Preference Setup], then press OK. Select and adjust the following settings: • [Audio] : Selects audio language for video. • [Subtitle] : Selects subtitle language for video. • [Disc Menu] : Selects menu language for video disc.
Update software 8 Product specifications To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. Check software version 1 2 Press SETUP. Select [Preference Setup] > [Version Info.], then press OK. » The software version is displayed. Update software from a CD-R or USB 1 2 3 4 English 7 Note • Specification and design are subject to change without notice.
Video • Signal system: PAL / NTSC • HDMI output: 480i/576i, 480p/576p, 720p, 1080i, 1080p Audio • S/PDIF Digital audio input: • Coaxial: IEC 60958-3 • Sampling frequency: • MP3: 32 kHz, 44.1 kHz, 48 kHz • WMA: 44.1 kHz, 48 kHz • Constant bit rate: • MP3: 112 kbps - 320 kbps • WMA: 48 kbps - 192 kbps Radio • Tuning range: FM 87.5-108 MHz (50/100 kHz) • Signal-to-noise ratio: FM 50 dB • Frequency response: FM 180 Hz ~ 10 kHz / ±6dB USB • Compatibility: Hi-Speed USB (2.
Troubleshooting Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product.
The contents of a USB storage device cannot be read. • Ensure that the format of the USB storage device is compatible with the home theater (see ‘Product specifications’ on page 15). • Ensure that the USB storage device is formatted with a file system that is supported by the home theater (note that NTFS is not supported). ‘No entry’ or ‘x’ sign appears on the TV. • The operation is not possible. EasyLink feature does not work.
language audio disc menu on-screen display subtitle S 14 14 13 14 M MP3 play 12 O one-touch play one-touch standby overview connectors main unit remote control 12 12 6 4 5 14 10 10, 10 10 17 9 12 9 11 17 10 3 15 R radio play program tune tuning grid recycle region code remote control repeat rotate pictures 3 14 13 14 14 14 10 15 15 8 9 17 10 12 T P password picture options slide show thumbnail overview troubleshooting play disc MP3 player options radio troubleshooting USB storage device product ca
