Register your product and get support at www.philips.
1 Important Safety and important notice Copyright notice Trademark notice 4 4 4 4 2 Your DVD player Playable media Product overview 5 5 5 3 Connect Connect audio/video cables Optional audio connections Connect USB flash drive Connect power 6 6 7 7 7 4 Get started Prepare the remote control Find the TV input channel Select menu display language Turn on progressive scan Use Philips EasyLink 7 7 8 8 8 8 5 Play Play a disc Play video Play music Play photo Play from a USB flash drive 9 9 9 10 11 12
1 Important Safety and important notice Warning • Risk of overheating! Never install the product in a confined • • • • • • • • space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Never place the product, remote control or batteries near naked flames or other heat sources, including direct sunlight. Avoid high temperature, moisture, water and dust.
2 Your DVD player Remote control a b Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
e • f Return to the previous display menu. / • Skip to the previous or next title, chapter, or track. g • Switch to the USB mode. h Numeric buttons • Select an item to play. i • Select a subtitle language on a disc. • Access the menu of copying/deleting audio files in a USB flash drive. j • Fit the picture display to the TV screen. • Zoom the picture in or out. k • Record the voice and music during karaoke into a USB flash drive. l • Access or exit the Karaoke setup menu.
Connect USB flash drive Eng l i s h Option 3: Connect to the video (CVBS) jack DVD PLAYER DVP3560K VIDEO IN 1 Connect a USB flash drive to the this product. jack on Note 1 2 Connect a composite video cable (supplied) to: • the TV OUT jack on this product. • the video input jack on the TV. Connect the audio cables (supplied) to: • the AUDIO OUT L/R jacks on this product. • the audio input jacks on the TV.
Note • If you are not going to use the remote control for a long time, remove the batteries. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Batteries contain chemical substances, so they should be disposed of properly. Find the TV input channel 1 2 Press to turn on this product. Turn on the TV and switch to the video input channel (refer to the TV user manual on how to select the A/V input channel).
» The TV (if supports one-touch play) automatically turns on and switches to the correct video-in channel. » If a disc is loaded in this product, disc play automatically starts. Control video play 1 Play a title. 2 Use the remote control to control the play. Button Eng l i s h One-touch play 1 Press to turn on this product. Action Start, pause or resume disc play. Stop disc play. One-touch standby 1 Press and hold on the remote control for more than 3 seconds.
1 2 Display the contents menu via one of the following ways: • If PBC is on, load in a VCD/SVCD. . • During play with PBC on, press Press the Numeric buttons to select a play option, and then press OK to start play. • If PBC is turned off, it skips the menu display and starts play from the first track. Preview disc contents 1 During play, press . » The disc status menu is displayed. 2 3 Select [Preview], and then press . Select a preview option, and then press OK .
Quick skip play 1 During play, press an option. Display Action [Disc Go To] Skip play to a specific time within the disc. Skip play to a specific time within a track. Skip play to a specific track number. [Track Go To] [Select Track] 2 You can play JPEG photos (files with .jpeg or .jpg extensions). 1 Insert a disc or USB flash drive that contains the JPEG photos. • For USB, press . » Slideshow begins (for Kodak disc), or a contents menu (for JPEG disc) is displayed.
Play musical slideshow 00:00/00:00 005/030 \MP3 Create a musical slideshow to play MP3/WMA music files and JPEG photo files simultaneously. Previous Track 1 Note Track 3 WMA and JPEG files on the same disc/USB flash drive. 1 2 3 Track 4 Play MP3/WMA music. Press to return to the main menu. Navigate to the photo folder/album and press OK to start slideshow play. » Slideshow begins and continues till the end of the photo folder or album. » Audio continues to play until the end of the disc.
Description [Speed] [Bitrate] Select a copying speed. Select a quality level. Higher bitrate for better sound quality and bigger file size. Copy track information into the MP3 file. The created files can only be saved in a USB flash drive. [CRT ID3] [Device] 6 7 8 Press to access the [TRACK] panel. Select an audio track, and then press OK . • To select another track, repeat step 7. • To select all tracks, select [Select all] in the menu, and press OK .
2 [Start at current time] - start recording immediately. [Start from beginning] - start recording from the beginning of the current song. • To exit without recording, press again . Press to select an option, and press OK . » The recording begins, and a recording progress bar is displayed. » When the current song ends, the recording completes and stops. » During recording, you may press and follow the on-screen instructions to stop the recording.
Note [Sound Mode] Select a preset sound effect to enhance the audio output. • [3D] - Select a virtual surround sound effect that is produced from the left and right audio channels. • [Movie Mode] - Select a sound effect for movies. • [Music Mode] - Select a sound effect for music. [CD Upsampling] For better sound quality in stereo mode, convert the music CD to a higher sampling rate. • [Off] - Turn off CD-upsampling. • [88.2kHz] - Convert to twice the original sampling rate. • [176.
[TV System] Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country. • [PAL] - For a PAL-system TV. • [Multi] - For TV that is compatible with both PAL and NTSC. • [NTSC] - For an NTSC-system TV. [TV Display] Select a display format: • [4:3 Pan Scan] - For a 4:3 screen TV: full-height display with the trimmed sides.
• [One Touch Play] - Turn on or off the feature of one-touch play. When EasyLink is enabled, press . » This product turns on. » The TV (if the TV supports one-touch play) automatically turns on and switches to the video-in channel. » Disc play starts if there is a disc in this product. [One Touch Standby] - Turn on or off the feature of one-touch standby. When EasyLink is enabled, press and hold for at least three seconds. » All connected HDMI CEC compliant devices switch to standby mode.
8 Additional information Update software For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website. Caution • Power supply must not be interrupted during software upgrade. 1. Press the Numeric buttons to enter ‘136900’ or the last set password at [Old Password] field. 2. Enter the new password at [New Password] field. 3. Enter the new password again at [Confirm PWD] field. 4. Press OK to exit the menu.
Component video output: 0.7 Vpp ~ 75 ohm HDMI output: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p Audio • Analog stereo output • Signal to noise ratio (1 kHz): > 90 dB (A-weighted) • Dynamic Range (1 kHz): > 80 dB (A-weighted) • Crosstalk (1 kHz): > 80 dB • Distortion/noise: (1 kHz): > 70 dB • MPEG MP3: MPEG Audio L3 • Digital output • Coaxial • HDMI output Main unit • Dimensions (w x h x d): 360 x 39 x 209 (mm) • Net Weight: approximately 1.
Play The disc cannot be played. • The disc is badly scratched, deformed, or dirty. Replace or clean the disc. • Use the correct disc format or file format. DivX video files cannot be played. • Ensure that the DivX video file is complete. • Ensure that the file name extension is correct. The aspect ratio of the screen is not aligned with the TV display setting. • The aspect ratio is fixed on the disc. DivX subtitles are not displayed correctly.
O O O O O O X O O O O O X O O O O O X O O O O O X O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363 – 2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363 - 2006.
Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 Ё᭛ Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 68
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. DVP3560K_93_UM_V1.
