Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Care for your product Care of the environment Compliance Help and support Open source software 2 Your product Main unit Remote control Connectors Wireless subwoofer 3 Connect Network setup prompt Placement Pair up with the subwoofer Connect audio from TV Connect audio from other devices Connect digital devices through HDMI 4 Chromecast built-in and Spotify Connect Connect this product to network Stream music to this product Navigate the App home menu 5 Use your product Ad
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
• • • battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery. If the battery compartment cannot be completely secured, discontinue use of the product.
Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country.
White LED • Lights up when this product is connected to the network. • Lights up when this product is in networked standby (connected to the network). • Blinks when this product is connecting to the network. Orange LED • Lights up when software update is detected. Remote control This section includes an overview of the remote control. a b e Display panel f NFC tag Tap the NFC-enabled device on the tag for Bluetooth connection. c d e l f g h i j k a (Standby-On) Switch this product on.
OPTICAL: Switch your audio source to the optical connection. AUDIO IN: Switch your audio source to the MP3 connection (3.5mm jack). USB: Switch to USB mode. : Switch to Bluetooth mode. SOURCE: Select an input source for this product. Or for Spotify Premium users, quickly resume Spotify Connect play. c / (Previous/Next) Skip to the previous or next track. d (Play/Pause) Start, pause or resume play. Connectors This section includes an overview of the connectors available on this product.
Wireless subwoofer This product comes with a wireless subwoofer. a b 3 Connect This section helps you connect this product to a TV and other devices. For information about the basic connections of this product and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Placement Place the subwoofer at least 1 meter (3 feet) away from the main unit, and 10 centimeters (4 inches) away from the wall. For best results, place your subwoofer as shown below. 2 3 4 Press the CONNECT (connect) button on the subwoofer to enter the pairing mode. »» The indicator on the subwoofer blinks white quickly. In HDMI ARC mode (press HDMI ARC), on the remote control, within six seconds, press twice then Volume + once, and then hold down BASS +.
1 TV 2 1 2 3 Using a High Speed HDMI cable, connect the HDMI OUT (ARC) connector on this product to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. Basic quality audio AUDIO OUT L 1 Note •• 100% interoperability with all HDMI-CEC devices is not guaranteed. •• If your TV is not HDMI ARC compliant, connect an audio cable to hear the TV audio through this product.
Option 1: Connect to other device through optical cable 2 Press AUDIO IN on the remote control of this product to enable the analog audio connection. Best quality audio Connect digital devices through HDMI 1 2 Using an optical cable, connect the OPTICAL connector on this product to the optical output on the external device. • The digital optical output on the external device might be labeled OPTICAL OUT, SPDIF or SPDIF OUT.
4 Chromecast built-in and Spotify Connect Through the speakers of this product, you can listen to music from the following online music services. • Chromecast-enabled apps • Spotify Connect What you need • Smartphone/tablet with Android 4.3 or above; iPhone/iPad with iOS 8.0 or above. • Download Philips “HCWeSet“ application from Google Play or iOS App Store. • A network router. • A network cable (for wired connection).
Note •• After network setup, you may also directly launch Chromecast enabled apps (such as Google Play Music, TuneIn Radio, etc.) or Spotify app to stream music to this product. •• To use Spotify Connect, a Spotify Premium user is required. •• When software update is detected, the orange LED on this product lights up. Navigate the App home menu 1 2 3 Launch Philips “HCWeSet” app on your mobile device. Go to the App home page. Tap to access the menu options for the following features.
Equalizer Change the high frequency (treble) and low frequency (bass) settings of this product. 1 Press TREBLE +/- or BASS +/- to change the frequency. Synchronize video and sound If the audio and video are not synchronized, delay the audio to match the video. 1 Press AUDIO SYNC +/- to synchronize the audio with the video. • AUDIO SYNC + increases the sound delay, and AUDIO SYNC - decreases the sound delay.
5 To exit Bluetooth, select other source. • When your switch back to Bluetooth mode, Bluetooth connection remains active. Note •• The music streaming may be interrupted by obstacles between the device and this product, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. •• If you want to connect this product with another Bluetooth device, press and hold on the remote control to disconnect the currently connected Bluetooth device.
Note •• This product may not be compatible with certain types of USB storage device. •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •• Digital camera PTP and MTP protocols are not supported. •• Do not remove the USB storage device while it is being read. •• DRM-protected music files (MP3) are not supported. •• Support a USB port: 5V , 1A.
6 Update software 6 To get the best features and support, update your product with the latest software. »» If the update is complete, this product automatically turns off and on again. »» If the update fails, “FAIL”(fail) is displayed on the display panel. Check software version 1 2 3 4 5 Launch Philips “HCWeSet” app on your mobile device. • Make sure that you connect this product to the network. Go to the App home page. Tap to access the menu options. Select “My Speakers”.
»» If the update is complete, this product automatically turns off and on again. »» If the update fails, “FAIL”(fail) is displayed on the display panel. Caution •• Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this player. 7 Wall mount Note •• Before wall mounting, make sure the wall can support the weight of this product.
8 Product specifications •• •• •• Note •• Specifications and design are subject to change without notice. Amplifier • • • • Total output power: 320W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / +/- 3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUDIO IN: 1 V Audio • S/PDIF Digital audio input: • Optical: TOSLINK USB • • • • Bluetooth •• •• •• •• .aac, .mka, .mp3, .wav, .m4a, .flac, .ogg, .ape, .dsf, .
• •• Operating temperature and humidity: 0°C to 45°C, 5% to 90% humidity for all climates Storage temperature and humidity: -40°C to 70°C, 5% to 95% 9 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the Subwoofer • • • • • • • Power supply: 220-240 V~, 50-60 Hz Power consumption: 30 W Standby power consumption: ≤ 0.5 W Impedance: 2 ohm Speaker driver: 1 x 203 mm (8") woofer Dimensions (W x H x D): 205 x 316 x 401 mm Weight: 7.0 kg Remote control batteries • 2 x AAA-R03-1.
• When "ARC" blinks, it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected. Bluetooth A device cannot connect with this product. • The device does not support the compatible profiles required for this product. • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. • The device is not correctly connected. Connect the device correctly.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/ third-party-licenses. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
License Texts and Acknowledgements for any open source software used in this Philips product Instructions to obtain source code for this software can be found in the user manual, or in the supplied safety leaflet (if available). 1. U-boot # # (C) Copyright 2000 - 2009 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project.
2. 3. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9.
4. Libnl, nopoll, nss-mdns, xz GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
1. 2. 3. constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.
7. 8. 9. is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.
for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT. 2.
Glenn Randers-Pehrson glennrp at users.sourceforge.net February 14, 2009 10. SQLite All of the deliverable code in SQLite has been dedicated to the HYPERLINK “http://en.wikipedia.org/wiki/Public_Domain”public domain by the authors. All code authors, and representatives of the companies they work for, have signed affidavits dedicating their contributions to the public domain and originals of those signed affidavits are stored in a firesafe at the main offices of HYPERLINK “http://www.hwaci.com”Hwaci.
EVENT SHALL INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. The Sun RPC support (from rpcsrc-4.0) is covered by the following license: Copyright (c) 2010, Oracle America, Inc.
0. If you receive a version of the software that is specifically labelled as not being for redistribution (check the version message and/or README), you are not permitted to redistribute that version of the software in any way or form. 1. All terms of the all other applicable copyrights and licenses must be followed. 2. Redistributions of source code must retain the authors’ copyright notice(s), this list of conditions, and the following disclaimer. 3.
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The file posix/runtests.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received.You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it.
limit operation or modification of the work as a means of enforcing, against the work’s users, your or third parties’ legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies.
7. Additional Terms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law.
to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients.
You should have received a copy of the GNU General Public License along with this program. If not, see . Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: Copyright (C) This program comes with ABSOLUTELY NO WARRANTY; for details type `show w’.
17.
This package may include either wpa_supplicant, hostapd, or both. See README file respective subdirectories (wpa_supplicant/README or hostapd/README) for more details. Source code files were moved around in v0.6.x releases and compared to earlier releases, the programs are now built by first going to a subdirectory (wpa_supplicant or hostapd) and creating build configuration (.config) and running ‘make’ there (for Linux/BSD/ cygwin builds).
worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License.
Specifications are subject to change without notice Copyright © 2015 Gibson Innovations Limited. Revised Edition © 2017 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. HTL5160B_12_UM_V7.
