Firmware-Upgrade Software

v. Press the remote control keys within 6 seconds in the following sequence [MUTE],
[MUTE], [VOL+], then press and hold [SURR] key, then “UPG” will be flashing slowly on
the player’s display.
vi. If the firmware file is detected, “UPG” will be flashing quickly. Please press [MUTE] key
on remote control to confirm to upgrade.
vii. “UPG” will be kept on the player’s display until the upgrade is completed.
viii. ”UPG” will be kept on the player’s display until the upgrade is completed.
NOTE: Do not press any button, interrupt with the power supply or remove the USB
flash device during the upgrading process, otherwise the product may become defective.
ix. The device would automatically restart when the upgrade is completed.
3.4. Upgrade the firmware (
((
(before version 43)
i. Cut and paste the bin file in the root directory in the USB flash drive.
ii. Turn on the product.
iii. Insert the USB flash drive into the USB slot.
iv. Press USB button on the remote control to select USB mode.
v. Wait for a while for firmware upgrade.
NOTE: Do not press any button, interrupt with the power supply or remove the USB
flash device during the upgrading process, otherwise the product may become defective.
vi. The device would automatically restart when the upgrade is completed.