User manual Soundbar Speaker HTL3320 Register your product and get support at www.philips.
1 Important Help and support Safety Care for your product Care of the environment Caution FCC and IC statement for Users (USA and Canada only) Compliance 2 Your Soundbar Main unit Wireless subwoofer Remote control Connectors Prepare the Remote Control Placement English Contents 4 4 4 5 5 6 6 10 10 10 10 11 11 4 Use your Soundbar 12 12 12 12 12 13 13 13 14 Turn ON and OFF Auto Standby Select Modes Select Equalizer (EQ) Effect Adjust the Volume Bluetooth Operation AUX / OPTICAL / HDMI ARC Operation U
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support For extensive online support, visit www.philips.com/welcome to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
Risk of contamination! • Do not mix batteries (old and new or carbon and alkaine, etc.). • CAUTION: Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type. • Remove batteries if they are exhausted or if the remote control is not to be used for a long time. • Batteries contain chemical substances, they should be disposed of properly. Risk of swallowing batteries! • The product/remote control may contain a coin/button type battery, which can be swallowed.
Caution FCC and IC statement for Users (USA and Canada only) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. 2. FCC INFORMATION Warning: • This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your Soundbar at www.philips.com/welcome. Wireless subwoofer English 2 Your Soundbar This section includes an overview of the Wireless subwoofer. Main unit a This section includes an overview of the main unit. b c a AC~ Socket Connect to the power supply. b PAIR button Press to to enter the pairing mode for the subwoofer.
d (Play/Pause) Start, pause or resume play in USB/BT mode. Connectors This section includes an overview of the connectors available on your Soundbar. e Vol+/Vol- (Volume) Increase or decrease volume. f Source buttons Aux: Switch your audio source to the MP3 connection (3.5mm jack). BT / Pair: Switch to Bluetooth mode. Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device. Optical: Switch your audio source to the optical connection.
• The provided Remote Control allows the unit to be operated from a distance. • Even if the Remote Control is operated within the effective range 19.7 feet (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control. • If the Remote Control is operated near other products which generate infrared rays, or if other remote control devices using infra-red rays are used near the unit, it may operate incorrectly.
3 Connect Note •• Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On. This section helps you connect your Soundbar to a TV and other devices, and then set it up. For information about the basic connections of your Soundbar and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate •• The setting method of HDMI-CEC and ARC may differ depending on the TV.
Do not press Pair on the rear of the subwoofer, except for manual pairing. English • AUX L R AUDIO OUT • Use a RCA to 3.5mm audio cable (not included) to connect the TV’s audio output sockets to the AUX socket on the unit. Connect to Power • Before connecting the AC power cord, ensure you have completed all other connections. • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
4 Use your Soundbar Select Modes 1 This section helps you use the Soundbar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the Soundbar to the correct source for other devices. • • • Turn ON and OFF • • • • When you first connect the unit to the main socket, the unit will be in STANDBY mode. The Standby indicator will light up.
4 1 Press Vol+/Vol- (Volume) to increase or decrease a volume level. • To mute sound, press (Mute). • To restore the sound, press (Mute) again or press Vol+/Vol- (Volume). Note: While adjusting the volume, the status LED indicator will flash quickly. When the volume has hit maximum/minimum value level, the status LED indicator will flashes once.
Tip •• While in OPTICAL/HDMI ARC mode, if there’s no sound output from the unit and the status Indicator flashes, you may need to activate PCM or Dolby Digital Signal output on your source device (e.g. TV, DVD or Blu-ray player). USB Operation Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory, etc. 1 2 Insert the USB device. Press the Source button repeatedly on the unit or press the USB button on the remote control to select USB mode.
Note •• Specifications and design are subject to change without notice. Bluetooth •• •• •• • • Bluetooth profiles: A2DP, AVRCP Bluetooth version: 4.2 + EDR Frequency band/Output power: 2402 MHz ~ 2480 MHz / ≤ 5 dBm 2.4G wireless frequency range: 2400 MHz ~ 2483 MHz 2.4G wireless maximum power: 6dBm Main unit •• •• •• •• •• •• •• •• •• •• • Power Supply: 100-240V~ 50/60Hz MAX Output Power by speaker: 25W x 4 + 50W x 2 Power Consumption: 25 W Standby Consumption: < 0.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/welcome. No power • • • Ensure that the AC cord is properly connected. Ensure that there is power at the AC outlet.
产品中有害物质的名称及含量 Names and Contents of Hazardous Substances 有害物质 Hazardous Substance 部件名称 Name of the parts Housing 外壳 Subwoofer 超重低音箱 Loudspeakers 喇叭单元 PWBs 电路板组件 Accessories (Remote control & cables) 附件（遥控器， 电源线，连接线） Batteries in Remote Control (ZnC) (Pb) 铅 (Hg) 汞 (Cd) 镉 (Cr (VI)) 六价铬 多溴联苯 多溴二苯醚 O O O O O O X O O O O O O O O O O O X O O O O O X O O O O O X O O O O O (PBB) (PBDE) 遥控器电池 本表格依据 SJ/T 11364 的规定编制。 The table is formulated according to SJ/
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. Specifications are subject to change without notice.
