Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 2 3 3 4 2 Your SoundBar 4 4 5 6 6 Help and support Safety Care for your product Care of the environment Compliance Main unit Remote control Connectors Wireless subwoofer 3 Connect and set up 7 Pair up with the subwoofer 7 Placement 7 Connect to TV 7 Connect audio from TV and other devices 8 4 Use your SoundBar 9 9 9 10 11 11 12 12 12 5 Update software 12 12 12 6 Wall mount 13 7 Product specifications 14 8 Troubleshooting 15 Adjust the volume Choose your sound Play
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Risk of contamination! • Do not mix batteries (old and new or carbon and alkaine, etc.). • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
Compliance This product complies with the radio interference requirements of the European Community. Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips.com. 2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome.
c Remote control / (Previous/Next) Skip to the previous or next track in USB mode. This section includes an overview of the remote control. d a e BASS +/Increase or decrease bass. b f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume. (Play/Pause) Start, pause or resume play in USB mode. g SOUND Select a sound mode. c d h SURROUND ON/OFF Select surround or stereo sound. e l i AUDIO SYNC +/Increase or decrease audio delay.
Connectors Wireless subwoofer This section includes an overview of the connectors available on your SoundBar. The SoundBar comes with a wireless subwoofer. a b c d a • • • e f Audio input from a USB storage device. Upgrade software of this product. Charge a USB device. b DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. c AUX IN (L/R) Connect to an analog audio output on the TV or an analog device.
3 Connect and set up This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. 4 If the pairing fails, repeat the steps above. Placement Place the subwoofer at least 1 meter (3 feet) away from your SoundBar, and ten centimeters away from the wall. For best results, place your subwoofer as shown below.
Option 1: Connect audio through a digital optical cable TV Best quality audio TV 1 2 Using a High Speed HDMI cable, connect the HDMI OUT (ARC)-TO TV connector on your SoundBar to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. On your TV, turn on HDMI-CEC operations. For details, see the TV user manual.
Option 3: Connect audio through analog audio cables Basic quality audio 1 Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device. DVD 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices.
• • • • BRIGHT: Spice up your dull movies and music with added sound effects. CLEAR: Hear every detail in your music and clear voices in your movies. WARM: Experience spoken words and music vocals in comfort. PERSONAL: Personalize the sound based on your preferences. Surround sound mode Experience an immersive audio experience with surround sound modes. 1 Press SURROUND ON/OFF to turn surround mode on or off. • On: Create a surround listening experience. • Off: Two-channel stereo sound.
5 To exit Bluetooth, select other source. • When your switch back to Bluetooth mode, Bluetooth connection remains active. Note •• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. •• If you want to connect your SoundBar with another Bluetooth device, press and hold on the remote control to disconnect the currently connected Bluetooth device.
Auto standby When playing media from a connected device, the SoundBar automatically switches to standby after 15 minutes of button inactivity and no audio/video play from a connected device. Set display brightness You can press DIM repeatedly to select a different brightness level of the display panel on this product. Apply factory settings You can reset this product to the default settings programmed at the factory.
6 7 »» If an upgrade media is not detected, an error message is displayed on the TV screen. Make sure that the latest software of this product is put in the USB storage device. Press to start the update. Wait until the update is completed. »» If the update is complete, this product automatically turns off and on again. Caution •• Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this player.
7 Product specifications Note • Version: • WMA: V7, V8, V9 Note •• This product supports WMA files which are converted via Windows Media Player (WMA files converted via other file format converters may not work). •• Specifications and design are subject to change without notice. Amplifier • • • • • FTC total output power: 40W • Left + Right: 25W (1%THD, 8ohm, 120Hz-20kHz) • Subwoofer: 15W (1%THD, 4ohm, 30Hz-80Hz) RMS Total output power: 120W RMS (+/- 0.
Remote control batteries • 1 x AAA-R03-1.5 V Standby power management • • • • When the product remains inactive for 15 minutes, it automatically switches to standby or networked standby. The power consumption in standby or networked standby is less than 0.5W. To deactivate Bluetooth connection, press and hold the Bluetooth button on the remote control. To activate Bluetooth connection, enable Bluetooth connection on your Bluetooth device, or enable Bluetooth connection via the NFC tag (if available).
Audio and video are not synchronized. • Press AUDIO SYNC +/- to synchronize the audio with the video. Error message is displayed on the display panel. • When "ERROR" is displayed, it indicates that an input audio format is not supported. • When "USB ERROR" is displayed, it indicates that the connected USB device is not supported. • When "HDMI ARC" blinks, it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson is under license.
Specifications are subject to change without notice 2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. HTL3110B_12_UM_V1.
