Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 3 3 3 4 2 Your product 4 4 5 6 3 Connect 6 6 7 8 Safety Care for your product Care of the environment Compliance Help and support Main unit Remote control Connectors Placement Connect audio from TV Connect audio from other devices 4 Use your product 9 9 9 10 11 11 11 11 11 5 Update software 12 12 12 6 Wall mount 13 7 Product specifications 13 8 Troubleshooting 14 Adjust the volume Choose your sound Play audio through Bluetooth MP3 player USB storage devices Auto s
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
• • • battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery. If the battery compartment cannot be completely secured, discontinue use of the product.
Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country.
AUDIO IN: Switch your audio source to the MP3 connection (3.5mm jack). USB: Switch to USB mode. : Switch to Bluetooth mode. HDMI ARC: Switch your source to HDMI ARC connection. Remote control This section includes an overview of the remote control. a b c / (Previous/Next) Skip to the previous or next track in USB mode. d (Play/Pause) Start, pause or resume play in USB mode. e BASS +/Increase or decrease bass. f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume.
3 Connect Connectors This section includes an overview of the connectors available on this product. h g This section helps you connect this product to a TV and other devices. For information about the basic connections of this product and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Connect audio from TV Connect this product to a TV. You can listen to audio from TV programs through the speakers of this product. Option 1: Connect to TV through HDMI (ARC) Best quality audio This product supports HDMI with Audio Return Channel (ARC). With the ARC feature, you can hear the TV audio through this product by using a single HDMI cable. What you need • A High Speed HDMI Cable. • Your TV supports both HDMI ARC and HDMI-CEC (see the TV user manual for details).
Option 3: Connect to TV through coaxial cable Best quality audio Connect audio from other devices You may also play audio from other devices through the speakers of this product. TV Option 1: Connect to other device through optical cable Best quality audio 1 2 Using a coaxial cable, connect the COAXIAL connector on this product to the coaxial output on the TV. • The digital coaxial output on the TV might be labeled COAXIAL/DIGITAL OUT or DIGITAL AUDIO OUT.
1 2 Using a coaxial cable, connect the COAXIAL connector on this product to the coaxial output on the external device. • The digital coaxial output on the external device might be labeled COAXIAL/DIGITAL OUT or DIGITAL AUDIO OUT. Press COAX on the remote control of this product to enable the coaxial connection. Option 3: Connect to other device through analog audio cables Basic quality audio 4 Use your product This section helps you use this product to play media from a wide range of sources.
Equalizer Change the high frequency (treble) and low frequency (bass) settings of this product. 1 Press TREBLE +/- or BASS +/- to change the frequency. Synchronize video and sound If the audio and video are not synchronized, delay the audio to match the video. 1 Press AUDIO SYNC +/- to synchronize the audio with the video. • AUDIO SYNC + increases the sound delay, and AUDIO SYNC - decreases the sound delay.
MP3 player Connect your MP3 player to play your audio files or music. What you need • An MP3 player. • A 3.5mm stereo audio cable. 1 2 3 Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO IN connector on this product. Press the buttons on the MP3 player to select and play audio files or music. Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory, etc.
5 Update software To get the best features and support, update your product with the latest software. 7 Wait until the update is completed. »» If the update is complete, this product automatically turns off and on again. Caution •• Do not turn off the power or remove the USB storage Check software version In any source mode, on the remote control press TREBLE -, BASS -, and Volume -in sequence. Update software via USB 1 2 Check the latest software version on www.philips.com/support.
6 Wall mount Note 7 Product specifications •• Before wall mounting, make sure the wall can support Note the weight of this product. •• For wall mounting, this product must be securely attached to the wall in accordance with the installation instructions. Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country.
Main unit • • • • • • • Power supply: • Model (Philips branded AC power adapter): TNUA3202003 • Input: 100-240 V~, 50/60 Hz 1.65 A • Output: 32 V , 2.0 A Standby power consumption: ≤ 0.5 W Dimensions (W x H x D): 950 x 51 x 69 mm Weight: 1.6 kg Built-in speakers: • Drivers: 3 x full range (90mm/3.5" x 34mm/1.
• When "ARC" blinks, it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected. Bluetooth A device cannot connect with this product. • The device does not support the compatible profiles required for this product. • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. • The device is not correctly connected. Connect the device correctly (see 'Play audio through Bluetooth' on page 10).
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license.
Specifications are subject to change without notice 2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. HTL2183B/2183S_12_UM_V3.
