For product support, visit www.philips.com/support HTL2163B User manual EN: For further assistance, call the customer support service in your country. • To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips Customer Care Center at 1-866-310-0744 • To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 839 1989; Mexico city: 5887-9736 For Product recycling information, please visit - www.recycle.philips.
Contents 1 Important 2 2 2 4 4 2 Your SoundBar 4 4 4 5 Help and support Important safety instructions Care for your product Care of the environment Main unit Remote control Connectors 3 Connect and set up 6 Placement 6 Connect to TV 7 Connect audio from TV and other devices 7 4 Use your SoundBar 8 8 8 9 10 10 10 10 11 5 Update software 11 11 11 6 Wall mount 12 7 Product specifications 13 8 Troubleshooting 14 9 Notice 15 15 Adjust the volume Choose your sound Play audio through Bluetooth
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. other apparatus (including amplifiers) that produce heat. •• Help and support For extensive online support, visit www.philips.
Install all batteries correctly, + and - as marked on the unit. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries when the unit is not used for a long time. • The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. • Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate. The product/remote control may contain a coin/button type battery, which can be swallowed.
Care for your product Use only microfiber cloth to clean the product. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
d a • (Play/Pause) Start, pause or resume play in USB mode. e BASS +/Increase or decrease bass. b f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume. c d g SOUND Select a sound mode. e l h SURROUND ON/OFF Select surround or stereo sound. i AUDIO SYNC +/Increase or decrease audio delay. f g j DIM Set the brightness of SoundBar display panel. h i k j k NIGHT Turn night mode on or off. l TREBLE +/Increase or decrease treble.
a DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. b AUX IN (L/R) Connect to an analog audio output on the TV or an analog device. c DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. d DC IN Connect to the power supply. e HDMI OUT (ARC) - TO TV Connect to the HDMI input on the TV. f SUBWOOFER Connect to the supplied subwoofer. g • • • (USB) Audio input from a USB storage device. Upgrade software of this product. Charge a USB device.
Connect to TV Connect your SoundBar to a TV. You can listen to audio from TV programs through your SoundBar. Use the best quality connection available on your SoundBar and TV. Connect to TV through HDMI (ARC) Your SoundBar supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your SoundBar by using a single HDMI cable. TV Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar speakers.
Option 2: Connect audio through a digital coaxial cable Good quality audio 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. 1 Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/DIGITAL OUT connector on the TV or other device. • The digital coaxial connector might be labeled DIGITAL AUDIO OUT. Before you start • Make the necessary connections described in the quick start guide and the user manual.
• • • • BRIGHT: Spice up your dull movies and music with added sound effects. CLEAR: Hear every detail in your music and clear voices in your movies. WARM: Experience spoken words and music vocals in comfort. PERSONAL: Personalize the sound based on your preferences. Surround sound mode Experience an immersive audio experience with surround sound modes. 1 Press SURROUND ON/OFF to turn surround mode on or off. • On: Create a surround listening experience. • Off: Two-channel stereo sound.
5 To exit Bluetooth, select other source. • When your switch back to Bluetooth mode, Bluetooth connection remains active. Note •• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. •• If you want to connect your SoundBar with another Bluetooth device, press and hold on the remote control to disconnect the currently connected Bluetooth device.
Apply factory settings You can reset this product to the default settings programmed at the factory. 1 In any source mode, on the remote control press Volume -, BASS -, and TREBLE - in sequence within three seconds. »» When the factory settings restore is complete, the product automatically switches off and restarts. 5 Update software To get the best features and support, update your product with the latest software. What you need • Connect this product to your TV through HDMI.
5 6 7 On the remote control, within six seconds press twice then Volume + once, and then hold down SURROUND ON. »» If an upgrade media is detected, on the TV screen you are prompted to start the update. »» If an upgrade media is not detected, an error message is displayed on the TV screen. Make sure that the latest software of this product is put in the USB storage device. Press to start the update. Wait until the update is completed.
7 Product specifications • Version: • WMA: V7, V8, V9 Note •• This product supports WMA files which are converted via Windows Media Player (WMA files converted via other file format converters may not work). Note •• Specifications and design are subject to change without notice. Bluetooth Amplifier • • • • • FTC total output power: 40W • Left + Right: 25W (1%THD, 8ohm, 120Hz-20kHz) • Subwoofer: 15W (1%THD, 4ohm, 30Hz-80Hz) RMS Total output power: 120W RMS (+/- 0.
8 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. Sound No sound from SoundBar speakers.
9 Notice This section contains the legal and trademark notices. Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: a This device may not cause harmful interference, and b This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
ONE (1) YEAR LIMITED WARRANTY WARRANTY COVERAGE: This warranty obligation is limited to the terms set forth below. WHO IS COVERED: This product is warranted to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.
P&F USA, Inc. PO Box 2248 Alpharetta, GA 30023-2248 Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. P&F is the warrantor in relation to the product with which this booklet was packaged.
