Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 2 3 3 4 2 Your SoundBar 4 4 5 6 Help and support Safety Care for your product Care of the environment Compliance Main unit Remote control Connectors 3 Connect 6 Placement 6 Connect audio from TV and other devices 7 4 Use your SoundBar 8 8 8 9 9 10 10 10 5 Wall mount 10 6 Product specifications 11 7 Troubleshooting 12 Adjust the volume Choose your sound MP3 player USB storage devices Auto standby Apply factory settings Update software EN 1
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Risk of contamination! • Do not mix batteries (old and new or carbon and alkaine, etc.). • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
Compliance This product complies with the radio interference requirements of the European Community. 2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. Main unit This section includes an overview of the main unit. a a b c d Switch the SoundBar on or to standby. b SOURCE Select an input source for the SoundBar. c Volume+/Increase or decrease volume.
• • AUDIO IN: Lights up when you switch to audio input source (3.5mm jack). USB: Lights up you switch to USB source. • USB: Switch your audio source to the USB connection. c REPEAT Select or turn off repeat mode in USB mode. Remote control d +/- (Volume) Increase or decrease volume. This section includes an overview of the remote control. e Mute or restore volume. f BASS +/Increase or decrease bass. a g NIGHT Turn night mode on or off. b h TREBLE +/Increase or decrease treble.
3 Connect Connectors This section includes an overview of the connectors available on your SoundBar. This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. a b c Note •• For identification and supply ratings, refer to the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar. Use the best quality connection available on your TV and other devices. Option 1: Connect audio through a digital optical cable 1 Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/DIGITAL OUT connector on the TV or other device. • The digital coaxial connector might be labeled DIGITAL AUDIO OUT.
4 Use your SoundBar Surround sound mode Experience an immersive audio experience with surround sound modes. 1 This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/support. • Switch the SoundBar to the correct source for other devices. Adjust the volume 1 Press +/- (Volume) to increase or decrease a volume level. • To mute sound, press .
Sound delay indicator • The more delay you change to, the more LED indicators light up. If you do not press the sound delay button for three seconds, the sound delay indicators light off. Note •• This feature is only applicable to COAXIAL (COAX) and OPTICAL (OPT) sources. Night mode For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press NIGHT to turn night mode on or off.
Auto standby When playing media from a connected device, this product automatically switches to standby after 15 minutes of button inactivity and no audio play from a connected device. Apply factory settings You can reset your SoundBar to the default setting mode. 1 In mute mode, quickly press AUX two times. »» The factory settings is restored. 5 Wall mount Note •• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country.
6 Product specifications Note •• Specifications and design are subject to change without notice. Amplifier • • • • • RMS total output power: 40W RMS (+/- 0.5 dB, 10% THD) Frequency response: 40 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Total Harmonic Distortion: <1% Input sensitivity: • AUX: 2Vrms +/-100mV • AUDIO IN: 1Vrms +/-100mV Main unit •• •• •• • • •• •• Power supply: 100-240 V~, 50-60 Hz Power consumption: 25 W Standby power consumption: ≤ 0.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. Sound No sound from SoundBar speakers.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations L imited under license from Koninklijke Philips N.V. HTL1180B_12_UM_V1.
