Always there to help you Register your product and get support at www.philips.com/support Question? Contact Philips HTL1170B User manual EN: For further assistance, call the customer support service in your country. • To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S.
Contents 1 Important 2 2 2 4 4 2 Your SoundBar 4 4 5 6 Help and support Important safety instructions Care for your product Care of the environment Main unit Remote control Connectors 3 Connect 6 Placement 6 Connect audio from TV and other devices 7 4 Use your SoundBar 8 8 8 9 9 10 10 10 5 Wall mount 11 6 Product specifications 11 7 Troubleshooting 12 8 Notice 13 Adjust the volume Choose your sound MP3 player USB storage devices Play audio through Bluetooth Apply factory settings Update so
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. •• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. •• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
•• • • • • •• •• •• Battery usage CAUTION - To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: • Install all batteries correctly, + and - as marked on the unit. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries when the unit is not used for a long time. • The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. • Perchlorate Material - special handling may apply. See www.dtsc.ca.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. 2 Your SoundBar Care for your product Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. Use only microfiber cloth to clean the product. Care of the environment Disposal of your old product and battery Main unit This section includes an overview of the main unit.
• • USB: Lights up you switch to USB source. • Lights up when you switch to Bluetooth mode and Bluetooth devices are paired. Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired. • • • AUX: Switch your audio source to the AUX connection. AUDIO IN: Switch your audio source to the MP3 connection (3.5mm jack). : Switch to Bluetooth mode. USB: Switch your audio source to the USB connection. c +/- (Volume) • Increase or decrease volume.
Connectors This section includes an overview of the connectors available on your SoundBar. a b c 3 Connect This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, refer to the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar. Use the best quality connection available on your TV and other devices. Option 3: Connect audio through analog audio cables Basic quality audio DVD Option 1: Connect audio through a digital optical cable Best quality audio 1 TV 1 Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device.
4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/support. • Switch the SoundBar to the correct source for other devices. Adjust the volume 1 Press +/- (Volume) to increase or decrease a volume level. • To mute sound, press . • To restore the sound, press again or press +/- (Volume).
• All the LED indicators blink three times when a sound delay is set to the maximum or minimum. Night mode For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press NIGHT to turn night mode on or off. Night mode indicator • If night mode is turned on, all the LED indicators light up one by one, with all the LED indicators on for three seconds. Finally the current source indicator stays on.
Play audio through Bluetooth Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • A Bluetooth device which supports Bluetooth profile A2DP, and with Bluetooth version as 2.1 + EDR. • The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).
5 Wall mount Note 6 Product specifications •• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. Note •• Specifications and design are subject to change without notice. Amplifier • 3.0-3.5mm/0.12”-0.
Bluetooth •• •• Bluetooth profiles: A2DP, AVRCP Bluetooth version: 2.1 + EDR Main unit •• •• •• • • •• •• Power supply: 120 V~, 60 Hz Power consumption: 25 W Standby power consumption: ≤ 0.5 W Speaker impedance: 4 ohm (full range) Speaker drivers: 4 x 54.5 mm (2") Dimensions (W x H x D): 865 x 67.8 x 85.5 mm (34.1" x 2.7" x 3.4") Weight: 1.8 kg / 3.96 lbs Remote control batteries • 1 x AAA-R03-1.5 V 7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product.
• • The device is not correctly connected. Connect the device correctly. (see 'Play audio through Bluetooth' on page 10) The SoundBar is already connected with another Bluetooth device. Disconnect the connected device, then try again. Quality of audio play from a connected Bluetooth device is poor. • The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar. The connected Bluetooth device connects and disconnects constantly.
FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations is under license. Other trademarks and trade names are those of their respective owners.
ONE (1) YEAR LIMITED WARRANTY WARRANTY COVERAGE: This warranty obligation is limited to the terms set forth below. WHO IS COVERED: This product is warranted to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.
P&F USA, Inc. PO Box 2248 Alpharetta, GA 30023-2248 Reproductor de Barra de Sonido 120V 60Hz HTL1170B/F7 25W 18.75 Wh 0.48 Wh Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product.
