User manual

38 EN
Discdoesnotplayhigh-denitionvideo.
• Make sure that the disc contains high-
denition video.
• Make sure that the TV supports high-
denition video.
• Use an HDMI cable to connect to the TV.
Sound
No sound from home theater speakers.
• Connect the audio cable from your home
theater to your TV or other devices.
However, you do not need a separate
audio connection when:
• the home theater and TV are
connected through an HDMI ARC
connection, or
• a device is connected to the HDMI IN
connector on your home theater.
• Set up the audio for the connected device
(see 'Set up the audio' on page 15).
• Reset your home theater to its factory
settings (see 'Restore default settings' on
page 30), and then switch it off and switch
on again.
• On your home theater, press SOURCE
repeatedly to select the correct audio
input.
Distorted sound or echo.
• If you play audio from the TV through the
home theater, make sure that the TV is
muted.
Audio and video are not synchronized.
• 1) Press
SOUND SETTINGS.
2) Press the Navigation buttons (left/right)
to select AUD SYNC, and then press
OK.
3) Press the Navigation buttons (up/
down) to synchronize the audio with
the video.
Cannot calibrate the speakers with the
calibration microphone.
• Make sure that the speakers, subwoofer,
and calibration microphone are connected
as described in the Quick start guide.
• Move the speakers to a different position,
and then calibrate again.
• Follow all the steps for auto calibration
(see 'Automatic calibration' on page 13).
• If you cannot calibrate the speakers
automatically, or you are not happy with
the automatic settings, calibrate the
speakers manually (see 'Manual setup' on
page 14).
Play
Cannot play a disc.
• Clean the disc.
• Make sure that the home theater supports
the type of disc (see 'Media formats' on
page 33).
• Make sure that the home theater supports
the region code of the disc (see 'Region
codes' on page 33).
• If the disc is a DVD±RW or DVD±R disc,
make sure that it is nalized.
CannotplayaDivXle.
• Make sure that the DivX le is encoded
according to the 'Home Theater Prole'
with the DivX encoder.
• Make sure that the DivX le is complete.
DivX or RMVB/RM subtitles do not display
correctly.
• Make sure that the subtitle le name is
the same as the movie le name (see
'Subtitles' on page 20).
• Select the correct character set:
1) Press OPTIONS.
2) Select [Character set].
3) Select the supported character set.
4) Press OK.
Cannot read the contents of a USB storage
device.
• Make sure that the format of the USB
storage device is compatible with the
home theater.
• Make sure that the le system on the USB
storage device is supported by the home
theater.