User manual

23EN
Button Action
Navigation
buttons
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation of
radio stations.
BACK Press and hold to erase the
preset radio station.
OPTIONS Manual:
1) Press
OPTIONS.
2) Press
/ to select your
preset.
3) Press
OPTIONS again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
SUBTITLE Toggle between the stereo
and mono sounds.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. When you
switch the tuning grid, all preset radio stations
are erased.
1 Press SOURCE repeatedly until RADIO
appears on the display panel.
2 Press .
3 Press and hold (Play) to toggle between
50 kHz or 100 kHz.
MP3 player
Connect a MP3 player to play audio les.
What you need
An MP3 player.
A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the MUSIC
iLINK connector on your home theater.
If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
2 Press SOURCE repeatedly until MUSIC
I-LINK appears on the display panel.
3 Press the buttons on the MP3 player to
select and play audio les.
Smartphone control
Use your mobile device such as iPhone (iOS
3.1.3 and above), Android phone (2.1 and
above), iPad, or tablet to:
Control your home theater
Browse a data disc or USB storage device
Switch to FM radio or Internet radio
Personalize your sound settings
Stream and share content from the devices
on your home network
Before you start
Connect your home theater, mobile device,
and other DLNA-compatible devices to
the same home network.
For better video quality, use wired
connection whenever possible.
Personalize the network name for your
home theater (see 'Personalize the
network name' on page 17).
Download Philips MyRemote application
on your mobile device.
For iPhone or iPad, search for the app
in App Store (App Store).
For Android based phone or tablet,
search for the app in Market (Market).