User manual

7EN
g FM ANTENNA
Connect to the supplied FM antenna.
h HDMI OUT (ARC)
Connect to the HDMI input on the TV.
i AUDIO IN-AUX
Connect to an analog audio output on the
TV or an analog device.
Wireless box (receiver)
a AC MAINS
Connect the supplied AC power cable.
b CONNECT (connect)
Press and hold to to enter the pairing
mode for the rear speakers and the main
unit.
c Rear speaker connectors
Connect to the rear speakers.
d Wireless indicator
• During wireless pairing between the
rear speakers and the home theater,
the indicator blinks at a fast rate.
• When the pairing succeeds, the
indicator lights up.
• When the pairing fails, the indicator
blinks at a slower rate.
cba
d
3 Connect and set
up
This section helps you connect your home
theater to a TV and other devices, and then set
it up.
For information about the basic connections
of your home theater and accessories, see the
quick start guide.
Note
• For identication and supply ratings, see the type plate
at the back or bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect speakers
The speaker cables are color-coded for easy
connection. To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
Speaker position plays a critical role in setting
up a surround sound effect. For best effect,
position all the speakers towards the seating
position and place them close to your ear level
(seated).