Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 3 3 4 2 Your home theater 5 5 5 6 Safety Care for your product Care of the environment 3D health warning Main unit Remote control Connectors 3 Connect and set up 8 Connect speakers 8 Connect to TV 8 Connect audio from TV and other devices 10 Set up EasyLink (HDMI-CEC control) 11 Connect and set up a home network 12 4 Use your home theater 14 14 14 16 17 17 18 19 19 20 22 23 5 Change settings 25 25 25 25 26 26 26 26 27 Ac
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
• • • of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.
3D health warning If you or your family has a history of epilepsy or photosensitive seizures, consult a medical professional before exposing yourself to flashing light sources, rapid image sequences or 3D viewing. To avoid discomfort such as dizziness, headache or disorientation, we recommend not watching 3D for extended periods of time.
2 Your home theater Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers(e.g. notification of product software upgrade), register your product at www.philips.com/welcome. Main unit This section includes an overview of the main unit. a b c n d o e f g p q h i r j s k a b c de f l t m u a (Open/Close) Open or close the disc compartment. b (Play/Pause) Start, pause or resume play. c a (Stop) Stop play.
• • Return to a previous menu screen. In radio mode, press and hold to erase the current preset radio stations. e Navigation buttons • Navigate menus. • In radio mode, press left or right to start auto search. • In radio mode, press up or down to tune the radio frequency. f OK Confirm an entry or selection. g h i j / (Previous/Next) Skip to the previous or next track, chapter or file. • In radio mode, select a preset radio station. • • • (Stop) / (Open/Close) Stop play.
a AC MAINS Fixed AC power cable. b SPEAKERS Connect to the supplied speakers and subwoofer. c DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. d AUDIO IN-AUX Connect to an analog audio output on the TV or an analog device. e USB(VOD) Slot for a USB storage device. The USB storage device is used to rent online videos. f FM ANTENNA Connect to the supplied FM antenna. g VIDEO OUT Connect to the composite video input on the TV.
3 Connect and set up SUB WOOFER FRONT LEFT FRONT RIGHT This section helps you connect your home theater to a TV and other devices, and then set it up. For information about the basic connections of your home theater and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product. Note •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Use the best quality connection available on your home theater and TV. Option 2: Connect to TV through standard HDMI Option 1: Connect to TV through HDMI (ARC) Best quality video If your TV is not HDMI ARC compliant, connect your home theater to the TV through a standard HDMI connection. Best quality video Your home theater supports HDMI version with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your home theater by using a single HDMI cable.
Option 3: Connect to the TV through composite video Basic quality video If your TV does not have HDMI connectors, use a composite video connection. A composite connection does not support high-definition video. TV 1 2 3 4 Note •• When your home theater and TV are connected through HDMI ARC, an audio connection is not required (see 'Option 1: Connect to TV through HDMI (ARC)' on page 9).
Option 3: Connect audio through analog audio cables Basic quality audio 1 Using an analog cable, connect the AUX connectors on your home theater to the AUDIO OUT connectors on the TV or other device. VCR Enable EasyLink 1 2 3 4 Press (Home). Select [Setup], and then press OK. Select [EasyLink] > [EasyLink] > [On] . On your TV and other connected devices, turn on HDMI-CEC control. For details, see the user manual of the TV or other devices.
Set up the audio If you cannot hear the audio output of a connected device through your home theater speakers, do the following: • Check that you have enabled EasyLink on all the devices, (see 'Set up EasyLink (HDMI-CEC control)' on page 11) and • on your TV, set the audio output to "Amplifier" (instead of TV speakers). For details, see the TV user manual, and • setup the EasyLink audio control. 1 2 3 4 5 Press (Home). Select [Setup], and then press OK.
3 4 5 6 Select [Setup], and then press OK. Select [Network] > [Network installation] > [Wired (Ethernet)]. Follow the onscreen instructions to complete the setup. • If connection fails, select [Retry], and then press OK. 3 4 5 Select [Network] > [Name your Product:]. Press the Alphanumeric buttons to enter the name. Select [Done], and then press OK to exit. Select [Finish], and then press OK to exit. • To view the network settings, select [Setup] > [Network] > [View network settings].
4 Use your home theater you’ve made at home, such as CD-R discs of photos, videos, and music. 1 2 Insert a disc into the home theater. If the disc does not play automatically, press DISC or select [play Disc] from the home menu. This section helps you use the home theater to play media from a wide range of sources. 3 Before you start • Make the necessary connections described in the quick start guide and the user manual. • Complete the first-time setup.
1 2 3 4 Press . Select AUD SYNC, and then press OK. Press the Navigation buttons (up/down) to synchronize the audio with the video. Press OK to confirm. 1 2 3 Play Blu-ray 3D disc Your home theater can play Blu-ray 3D video. Read the 3D health warning before playing a 3D disc. What you need • A 3D TV • A pair of 3D glasses that are compatible with your 3D TV • A 3D Blu-ray video • A high speed HDMI cable 1 2 3 Using the high speed HDMI cable, connect your home theater to a 3D compatible TV.
Note 2 •• To clear the memory on the storage device, press (Home), select [Setup] > [Advanced] > [Clear memory]. Data files Your home theater can play pictures, audio and video files contained in a disc or a USB storage device. Before you play a file, check that the file format is supported by your home theater (see 'File formats' on page 30). 1 2 To stop play, press . • To resume the video from where you stopped, press (Play). • To play the video from the start, press OK.
• USB storage devices Enjoy pictures, audio, and video stored on a USB storage device such as an MP4 player or digital camera. What you need • A USB storage device that is formatted for FAT or NTFS file systems, and complies with the Mass Storage Class. • A media file in one of the supported file formats (see 'File formats' on page 30). Note •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized.
• • [Repeat A-B]: Mark two points within a chapter or track to repeat play, or turn off the repeat mode. [Picture settings]: Select a predefined color setting. Note •• Make sure that the picture and audio formats are supported by your home theater (see 'File formats' on page 30). Picture options While viewing a picture, zoom into the picture, rotate it, add animation to a slideshow, and change the picture settings. 1 2 Press OPTIONS. »» The picture options menu appears.
Button Action Navigation buttons Left/Right: Search for a radio station. Up/Down: Fine tune a radio frequency. Press to stop the installation of radio stations. Press and hold to erase the preset radio station. Manual: 1) Press OPTIONS. 2) Press / to select your preset. 3) Press OPTIONS again to store the radio station. Automatic: Press and hold for three seconds to reinstall the radio stations. Toggle between the stereo and mono sounds.
»» A browsing bar is displayed at the bottom of the screen. • 3 If your home theater is not found, check the network connection or tap the Devices tab on your mobile device to search again. Select one of the following tabs to access more options. • To return to the previous screen, press back button. Option Action App Home Media Return to the home screen of your device. DISC: Browse and play a file stored on a data disc. USB: Browse and play a file stored on a USB storage device.
2 3 4 5 (see 'Connect and set up a home network' on page 12). Press (Home). Select [Smart TV], and then press OK. Follow the onscreen instructions to confirm the onscreen message. »» The Smart TV home page is displayed. Use the remote control to select applications and enter text (for example, web URL, passwords, etc) (see 'Navigate Smart TV' on page 21). Navigate Smart TV Button Action Navigation buttons OK Select an application or navigate. Confirm an entry or selection.
Browse PC through DLNA Access and play the pictures, audio and video files from a computer or media server on the home network through your home theater. Before you start • Install a DLNA-compliant media server application on your device. Make sure that you download an application that works best for you. For example, • Windows Media Player 11 or higher for PC • Twonky Media Server for Mac or PC • Enable media sharing of files.
4 5 6 7 8 »» You return to Windows Media Player screen. Click the Stream tab and select More streaming options. »» The Media streaming options screen is displayed. Make sure that you see a media program in the Local network screen. »» If you don't see a media program, check that your PC firewall is not blocking the connection. Select the media program and click Allowed. »» A green arrow appears next to the media program.
Sound options Description SOUND AUD SYNC Select a sound mode. Delay the audio to match the video. Reduce sudden changes in volume, for example, during TV commercials. AUTO VOL 3 4 • • • • Select an option, and then press OK. Press BACK to exit. • If you do not press a button within a minute, the menu exits automatically. • • BALANCED: Experience the original sound of your movies and music, without added sound effects.
5 Change settings Picture and video settings The home theater settings are already configured for optimal performance. Unless you have a reason to change a setting, we recommend that you keep the default setting. 1 2 3 4 Note •• You cannot change a setting that is grayed out. •• To return to the previous menu, press BACK. To exit the menu, press (Home). Language settings 1 2 3 4 Press (Home). Select [Setup], and then press OK. Select [Preference], and then press OK.
• • • [Night mode]: For quiet listening, decrease the volume of loud sounds on your home theater. Night mode is only available in DVDs and Blu-ray discs with Dolby Digital, Dolby Digital Plus, and Dolby True HD soundtracks. [HDMI Audio]: Set the HDMI audio output from your TV, or disable HDMI audio output from the TV. [Default sound settings]: Restore the equalizer settings of all the sound modes to the default values. • Energy saving settings 1 2 3 4 Parental control settings 1 2 3 4 Press (Home).
Tip •• Enable audio post processing before you select a predefined sound mode (see 'Sound mode' on page 24). Restore default settings 1 2 3 4 Press (Home). Select [Setup], and then press OK. Select [Advanced] > [Restore default settings], and then press OK. Select [OK], and then press OK to confirm. »» Your home theater is reset to its default settings except for some settings such as parental control and DivX VOD registration code.
6 Update software Philips continually tries to improve its products. To get the best features and support, update your home theater with the latest software. Compare the version of your current software with the latest version on www.philips.com/ support. If the current version is lower than the latest version available on the Philips support website, upgrade your home theater with the latest software.
cord for a few seconds and then reconnect it. Update software through the Internet 1 2 3 4 5 Connect your home theater to a home network with a high-speed Internet access (see 'Connect and set up a home network' on page 12). Press (Home). Select [Setup], and then press OK. Select [Advanced] > [Software update] > [Network]. »» If an upgrade media is detected, you are prompted to start or cancel the update. »» Downloading of the upgrading file may take long, depending on your home network condition.
7 Product specifications File formats • • Note •• Specifications and design are subject to change without notice. • Region codes The type plate on the back or bottom of the home theater shows which regions it supports. Country Europe, United Kingdom Asia Pacific, Taiwan, Korea Latin America DVD BD A A Australia, New Zealand Audio: • .aac, .mka, .mp3, .wma, .wav, .mp4, .m4a, .flac, .ogg • .ra (Available only in Asia Pacific and China) Video: • .avi, .divx, .mp4, .m4v, .mkv, .asf, .wmv, .m2ts, .
.ra RM .flac FLAC AAC, HEAAC AAC, HEAAC Cook FLAC .ogg OGG Vorbis MP3 Upto 192 kbps Upto 192 kbps 96469 bps Upto 24 bps Variable bit rate, maximum block size 4096 Upto 320 kbps .divx files in AVI container Audio codec Video codec Bit rate PCM, Dolby Digital, MP3, WMA DivX 3.11, DivX 4.x, DivX 5.x, DivX 6.x 10 Mbps max .mp4 or .m4v files in MP4 container Audio codec Video codec Bit rate Dolby Digital, MPEG, MP3, AAC, HE-AAC, DD+ MPEG 1, MPEG 2 40 Mbps MPEG 4 ASP 38.4 Mbps 25 Mbps H.
.asf and .wmv files in ASF container • Audio codec Video codec Bit rate Dolby Digital, MP3, WMA, DD+ MPEG 4 ASP 38.4 Mbps Video 25 Mbps H.264/AVC HiP@4.2 WMV9 Video codec Bit rate PCM, DTS core, MPEG, MP3 MPEG 1, MPEG 2 40 Mbps Audio codec Video codec Bit rate MP3, AAC H.264/AVC upto HiP@4.2 H.263 25 Mbps 38.4 Mbps .3gp files in 3GP container Audio codec Video codec Bit rate AAC, HEAAC MPEG 4 ASP 38.4 Mbps H.264/AVC upto HiP@4.2 25 Mbps max .rm, .rv, and .
• • • • • Russia/India: 220-240 V~, 50 Hz Power consumption: 80 W Standby power consumption: ≤ 0.5 W Dimensions (WxHxD): 435 x 58 x 280 mm Weight: 2.66 kg Subwoofer • • • • • • Output power: 166 W RMS (30% THD) Impedance: 4 ohm Speaker drivers: 165 mm (6.5") woofer Dimensions (WxHxD): 178 x 300 x 343 mm Weight: 3.66 kg Cable length: 3.
8 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support. Main unit The buttons on the home theater do not work. • Disconnect the home theater from the power supply for a few minutes, then reconnect.
• • • Make sure that the home theater supports the type of disc (see 'Media formats' on page 30). Make sure that the home theater supports the region code of the disc (see 'Region codes' on page 30). If the disc is a DVD±RW or DVD±R disc, make sure that it is finalized. When you switch on the TV, the home theater automatically switches on. • This behavior is normal when you are using Philips EasyLink (HDMI-CEC). To make the home theater work independently, switch off EasyLink. Cannot play a DivX file.
Cannot access BD-Live features. • Make sure that the home theater is connected to the network (see 'Connect and set up a home network' on page 12). • Make sure that the network is set up (see 'Connect and set up a home network' on page 12). • Make sure that the Blu-ray disc supports BD-Live features. • Clear memory storage (see 'BD-Live on Blu-ray' on page 15). My 3D video played in 2D mode. • Make sure that your home theater is connected to a 3D TV through an HDMI cable.
9 Notice This section contains the legal and trademark notices. Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S.
'DVD Video' is a trademark of DVD Format/ Logo Licensing Corporation. Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software.
10 Language code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 Ё᭛ Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk
11 Index 2 2nd audio language 2nd subtitle language 3 3D disc in 2D mode 3D safety 3D video 5 5.
media sharing menu language musical slideshows N network night mode O one-touch play one-touch standby options P parental control PBC (play back control) picture options picture resolution picture settings picture-in-picture play disc play from PC play USB storage device power settings predefined sound mode preference R recycling region codes remote control repeat S shuffle sleep timer slide animation Smart TV software update software version sound speaker position speaker specifications subtitle
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. HTB3270_12_UM_V1.
