User manual

Cleaning and maintenance
Cleaning
Donotuseabrasives,scourersorliquidssuchas
alcohol,petroloracetonetocleantheappliances.
Shaver/trimmer
Clean the shaver and the trimmer after every use.
Be careful with hot water. Always check if the
waterisnottoohot,topreventyourhandsfrom
getting burnt.
Neverdrytheshavingunitwithatowelortissue,
as this may damage the shaving heads.
Note: The shaver is watertight and can be cleaned
under the tap.
1 Press the on/off button to switch on the shaver.
2 Clean the shaving unit and the trimmer while
the shaver is switched on.
There are two ways to clean the shaver/trimmer:
Rinse the shaving unit/trimmer under a hot tap for
at least 30 seconds.
Immerse the shaving unit/trimmer in hot water for
at least 30 seconds.
3 Switchofftheshaverandshakeoffexcess
water.
4 Slide the protection cap onto the shaver to
prevent damage.
Note: If the shaver doesn’t shave as well as it used
to and you are unable to solve this with the cleaning
methods described in this chapter, consult chapter
-
-
ENGLISH14