User Guide

ManualsBrandsPhilips ManualsKitchen Appliances7000 series Nudelmaschine

HR2660

User Manual

www.philips.com/myPastaMaker

Summary of content (16 pages)

PAGE 1
HR2660 www.philips.
PAGE 2
PAGE 3
ENGLISH 1 17 16 14 13 12 15 1 11 2 10 3 9 4 8 5 7 6 2 1 5 4 Add min.
PAGE 4
3 ENGLISH 4 5 5 3 2 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 20 22 23 24 25 2 1 1
PAGE 5
ENGLISH 26 27 30 < 60˚C / 140˚F 28 29 5
PAGE 6
ENGLISH Table of Contents Important Danger Warning Caution Electromagnetic fields (EMF) 7 7 7 8 8 Recycling 8 Guarantee and support 9 Shaping disc overview 9 Recipe 9 Introduction 10 Product overview (Fig. 1) 10 Control panel overview (Fig.
PAGE 7
ENGLISH 7 Important Read this important information carefully before you use the appliance and save it for future reference. Danger • Never immerse the motor unit in water or any other liquid and do not rinse it under the tap. Use only a moist cloth to clean the motor unit. Warning • Do not use the appliance if the plug, the mains cord or other parts are damaged or have visible cracks. • Unplug the appliance when not in use.
PAGE 8
ENGLISH • Do not insert any objects into the appliance. • Take extra caution when cleaning the appliance to avoid getting cut by any sharp edges. • Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use. • Never reach into the mixing chamber when the appliance is plugged in. • To prevent a short circuit or an electric shock, do not pour water or any liquid onto the display.
PAGE 9
ENGLISH 9 Guarantee and support If you need service or information or if you have a problem, visit the Philips website at www.philips.com/support or contact the Philips Consumer Care Center in your country. You can find its phone number in the worldwide guarantee leaflet. If there is no Consumer Care Center in your country, go to your local Philips dealer.
PAGE 10
ENGLISH 10 Introduction Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Product overview (Fig.
PAGE 11
ENGLISH 11 Note: Make sure the inner cavity of the shaping disc and disc holder is properly fitted. (Fig. 12) 5 Attach the front panel to the main unit. (Fig. 13) Note: y The front panel is heavy. Take extra caution when assembling it. 6 Fasten the front panel control knobs. (Fig. 14) Note: y If the front panel or the shaping disc is not properly assembled, a safety switch will prevent the appliance from working. y Make sure the front panel is completely fastened before using the appliance.
PAGE 12
ENGLISH Note: If the appliance is not in the automatic mode, press the Automatic button before pressing the Start/pause button. 9 After the mixing starts, slowly pour in the liquid along the entire length of the slot in the lid. (Fig. 22) Note: During dough mixing, do not add other ingredients after you have poured in the liquid. Otherwise, it will affect the result of the pasta texture. 10 After the pasta maker finishes mixing, it will beep once and start extruding pasta after a few seconds.
PAGE 13
ENGLISH 13 Cleaning 1 Disconnect the plug from the power outlet. (Fig. 25) 2 Remove the mixing chamber lid. (Fig. 3) 3 Loosen the front panel control knobs. (Fig. 4) Note: The front panel is heavy. Take extra caution when removing it. 4 Disassemble the front panel, the shaping disc, the shaping disc holder, the mixing paddle, and the mixing chamber in order. (Fig. 5) 5 Use a dry cloth to clean flour residue on the main unit. (Fig.
PAGE 14
ENGLISH Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Center in your country. Problem Cause Solution The indicators do not light up. The power plug is not connected correctly. Check whether the power plug is plugged correctly and the outlet is working properly.
PAGE 15
Problem The appliance stops during processing, E2 displays on the screen, the indicators are flashing quickly, and the alarm sounds. E4 displays on the screen. Cause The mixing paddle may be blocked by some foreign objects. The dough may be too dry. The wrong program is selected. The appliance malfunctions. Solution Disconnect from the power source, clean the pasta maker, and follow the user manual again to restart the pasta making. 1 Switch off and unplug your Pasta Maker.