User manual
11ENGLISH
Note
• Clean the appliance after every use. Refer to the chapter ‘Cleaning’.
Cleaning
Caution
• Never immerse the appliance in water. Do not clean the appliance in the
dishwasher.
• Keep both the motor unit connector and jug connector clean and dry.
Note
• Always unplug the appliance and wait until it cools down before you clean it.
• Never use scouring pads, abrasive cleaning agents or aggressive liquids such
as alcohol, gasoline or acetone to clean the appliance.
1 Remove the power plug from the wall outlet and from the appliance (Fig. 15).
2 Hold the handle of the jug with one hand and with the other hand lift the motor
unit o the jug by its handgrip (Fig. 3).
3 Clean the blade unit and overow sensor by rinsing them under the tap (Fig. 17).
Note
• Do not touch the blades. The blades are very sharp.
Tip
• If necessary, clean the blade unit and overow sensor with a soft brush.
4 Clean the inside of the jug under the tap. If necessary add some dishwashing
liquid and use a soft brush (Fig. 18).
5 Clean the top part of the motor unit and the outside of the jug with a moist
cloth (Fig. 19).
Tip
• If the appliance and the blade unit are very dirty, pour boiling hot water into the
jug and place the motor unit on the jug. Let the jug and the motor unit soak for
10 minutes.
This appliance has no other user-serviceable parts. For assistance in the U.S. or
Canada only, call 1-866-309-8817.