User Guide

Do not exert too much pressure on the pusher, as
this could affect the quality of the end result and it
could even cause the lter to come to a halt.
Never insert your ngers or an object into the
feeding tube.
5 After you have processed all ingredients and
the juice ow has stopped, switch the appliance
off and wait until the lter has stopped
rotating.
6 Pour the juice from the jug into the glass.
The removable foam separator separates the
foam from the juice.
Tips
Use fresh fruit and vegetables, as they contain
more juice. Pineapples, beetroots, celery stalks,
apples, cucumbers, carrots, spinach, melons,
tomatoes, pomegranates, oranges and grapes are
particularly suitable for processing in the juice
extractor.
You don’t have to remove thin peels or skins. Only
thick peels, e.g. those of oranges, pineapples and
uncooked beetroots, need to be removed. Also
remove the white pith of citrus fruits because it
has a bitter taste.
If you want to juice fruits with stones, remove the
stone before juicing.
Apple juice turns brown very quickly. You can
slow down this process by adding a few drops of
lemon juice.
Fruits that contain starch, such as bananas, papayas,
avocados, gs and mangoes are not suitable for
processing in the juice extractor. Use a food
,
-
-
-
-
-
ENGLISH8
processor, blender or bar blender to process these
fruits.
Leaves and leaf stalks of e.g. lettuce can also be
processed in the juice extractor.
The juicer is not suitable for processing very hard
and/or brous/starchy fruits or vegetables such as
sugar cane.
Cleaning
The appliance is easier to clean if you do so
immediately after use.
Do not use abrasive cleaning agents, scourers,
acetone, alcohol etc. to clean the appliance.
All detachable parts are dishwasher-safe.
1 Switch the appliance off, remove the plug from
the wall socket and wait until the lter has
stopped rotating.
2 Remove the dirty parts from the motor unit.
Dissassemble the appliance in the following
order:
Remove the pulp container;
Remove the pusher;
Open the clamps;
Remove the lid.
3 Remove the juice collector together with the
lter and then remove the spout from the juice
collector.
4 Clean these parts with a cleaning brush in
warm water with some washing-up liquid and
rinse them under the tap.
5 Clean the lter with a soft cleaning brush.
6 Clean the motor unit with a damp cloth.
-
-
,
,
,
-
-
-
-