User manual
Cleaning
Do not immerse the motor unit, the whisk coupling unit (HR1372/
HR1374 only), the coupling unit of the mini chopper (HR1372 only)
and the coupling unit of the extra-large chopper (HR1372/HR1371/
HR1374 only) in water.
1 Unplug the appliance.
2 Press the release buttons on the motor unit to remove the blender
bar or coupling unit.
3 Disassemble the rest of the parts.
Tip: You can also remove the rubber rings from the chopper bowls for extra
thorough cleaning.
4 See the separate cleaning table at the end of this user manual for
further instructions.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 11).
You can order a direct-driven mini chopper (under service code number
4203 035 83460) from your Philips dealer or a Philips service centre as
an extra accessory for the HR1372, HR1371 and HR1370/HR1374.
Use the quantities and processing times of the mini chopper for this
accessory.
ENGLISH12