User manual

When the cleaning chamber is lled with
cleaning uid, do not move it to prevent leakage of
cleaning uid.
5 Put the small plug in the Jet Clean System and
put the adapter in the wall socket.
, The holder automatically moves to the highest
position.
The Jet Clean System is now ready for use.
Using the Jet Clean System
1 Place the shaver upside down in the holder and
push the lever down completely to lock the
shaver into place.
, The battery symbol on the Jet Clean System
goes on to indicate that the shaver is being
charged.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
2 Press the on/off button on the Jet Clean
System to start the cleaning program.
The cleaning program has two phases, the cleaning
and drying phase.
, The battery symbol on the Jet Clean System
goes out.
, During the rst phase of the cleaning program,
the cleaning symbol starts to ash and the
shaver is automatically lowered into the cleaning
uid.
, The shaver automatically switches on and off
several times and moves up and down.
, The cleaning symbol ashes throughout the
cleaning program, which takes 8 minutes.
ENGLISH 17