User manual

, When the battery is fully charged, the battery
symbol on the Jet Clean System goes out and
the charging process stops.
5 To remove the shaver from the Jet Clean
System: move the lever upwards until it does
not go any further (1) and remove the shaver
(2).
Charging with the adapter
Do not charge the shaver in a closed pouch.
1 Put the small plug in the shaver.
2 Put the adapter in the wall socket.
, The display shows that the shaver is charging
(see chapter ‘The display’).
Using the shaver
Note: You can also use the appliance without charging.
Simply connect the appliance to the mains.
Shaving
1 Press the on/off button once to switch on the
shaver.
, The power-on symbol in the on/off button lights
up.
2 Move the shaving heads over your skin. Make
both straight and circular movements.
- Shaving on a dry face gives the best results.
- Your skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
3 Press the on/off button once to switch off the
shaver.
ENGLISH14