User manual

Removing the rechargeable shaver battery
Onlyremovethebatteryifitiscompletelyempty.
1 Remove the adapter from the wall socket and pull the appliance
plugoutoftheshaver.
2 Let the shaver run until it stops and undo the two screws in the
backoftheshaver(Fig.37).
3 Undothetwoscrewsinthehairchamber(Fig.38).
4 Undothethreescrewsinthepowerunit(Fig.39).
5 Bendthe4hooksaside(1)totakeoutthepowerunit(2)(Fig.40).
Be careful, the hooks are very sharp.
6 Removethepowerunitcoverwithascrewdriver(Fig.41).
7 Removetherechargeablebattery.
Be careful, the battery strips are very sharp.
Do not connect the shaver to the mains again after you have removed
thebattery.
Guarantee and service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.
Guarantee restrictions
The shaving heads (cutters and guards) are not covered by the terms of
the international guarantee because they are subject to wear.
ENGLISH 15