User manual

Problem Solution
Long hairs may obstruct the shaving heads. Clean the
cutters and guards with the brush supplied (see
chapter ‘Cleaning and maintenance’).
The shaver
does not work
when I press
the on/off
button.
The battery may be empty. Recharge the battery
(see chapter ‘Charging’) or connect the shaver to the
mains.
The shaver may not be connected to the mains. Put
the appliance plug in the shaver and put the adapter
in the wall socket.
The shaving unit
has come off
the shaver.
The shaving unit was not placed correctly. Put the
shaving unit back onto the shaver by inserting the
hinge into the slot in the rim of the hair chamber.
Then push the shaving unit home until it locks into
place (‘click’).
The shaver is
not entirely
clean after I
clean it in the
Jet Clean
system.
The cleaning fluid in the cleaning chamber may be
soiled. Empty and rinse the cleaning chamber.
The cleaning fluid level may be too low. If the fluid
volume in the cleaning chamber drops below the
minimum level during the cleaning program, the
program aborts. The cleaning light flashes with
intervals and the holder returns to its starting
position. Refill the cleaning chamber with cleaning
fluid up to the MAX indication (see chapter
‘Cleaning and maintenance’).
ENGLISH16