User manual

Cleaning the trimmer
Clean the trimmer every time you have used it.
1 Switch off the shaver, remove the adapter from the wall socket and
pull the appliance plug out of the shaver.
2 Clean the trimmer with the brush supplied (Fig. 31).
3 Lubricate the trimmer teeth with a drop of sewing machine oil
every six months (Fig. 32).
Storage
There are two ways to store the shaver:
- put the protection cap on the shaver to prevent damage (Fig. 12).
- store the shaver in the Jet Clean system (Fig. 33).
Replacement
For optimal shaving performance, we advise you to replace the shaving
heads every 2 years.
Replace damaged or worn shaving heads with HQ8 Philips Shaving Heads
only.
Note: Do not mix up the cutters and the guards to guarantee optimal
shaving performance.
1 Switch off the shaver, remove the adapter from the wall socket and
pull the appliance plug out of the shaver.
2 Press the release button to open the shaving unit.
3 Turn the lock anticlockwise (1) and remove the retaining
frame (2) (Fig. 28).
4 Remove the shaving heads and place new ones in the shaving unit.
Put the retaining frame back into the shaving unit and turn the lock
clockwise (Fig. 34).
ENGLISH 13