User manual

2 Let the shaver run until it stops,
undo the screws and open the
shaver (fig. 19).
3 Remove the battery (fig. 20).
Do not connect the shaver to the mains
again after the battery has been
removed.
Guarantee & service
.
If you need information or if you have a
problem, please visit the Philips Web site
at www.philips.com or contact the Philips
Customer Care Centre in your country
(you will find its phone number in the
worldwide guarantee leaflet).
If there is no Customer Care Centre in
your country, turn to your local Philips
dealer or contact the Service Department
of Philips Domestic Appliances and
Personal Care BV.
Troubleshooting
.
1 Reduced shaving performance
B
Cause 1: the shaving heads are dirty.
B
The shaver has not been cleaned well
enough or has not been cleaned for a
long time.
◗ Clean the shaver thoroughly before
you continue shaving. See chapter
'Cleaning and maintenance'.
B
Cause 2: long hairs are obstructing the
shaving heads.
◗ Clean the cutters and guards with
the brush supplied. See chapter
'Cleaning and maintenance', section
'Every two months: shaving heads'.
B
Cause 3: the shaving heads are
damaged or worn.
◗ Replace the shaving heads. See
chapter 'Replacement'.
2 The shaver does not work when the
on/off slide is pushed upwards.
B
Cause: the battery is empty.
◗ Recharge the battery. See chapter
'Charging'.
4222 002 42726
3/6