operation manual
2 Put the plug in the wall socket.
3 Set the control slide to the preferred setting to switch on the
appliance. (Fig. 6)
4 Place the straightening comb in the hair (Fig. 17).
5 Press the lever towards the handle to close the brush (Fig. 18).
6 Make brushing movements from the top of the head downwards.
7 Whenyouhavenishedstylingyourhair,switchofftheappliance.
Cleaning
Never rinse the appliance with water.
Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
1 Switch off the appliance and unplug it.
2 Let the appliance and the attachments cool down completely on a
heat-resistant surface.
3 Remove the attachments from the appliance before you clean them.
4 Remove hairs and dust from the attachments. Then clean the
attachments with a moist cloth or rinse them under the tap.
Note: If you have used styling products on your hair before or during styling,
clean the attachments thoroughly with a moist cloth after use.
Note: Make sure the attachments are dry before you use or store them.
5 Clean the appliance with a small brush or a dry cloth.
Storage
Do not wind the mains cord round the appliance.
1 Switch off the appliance and unplug it.
2 Let the appliance and the attachments cool down completely on a
heat-resistant surface.
ENGLISH12