operation manual

Never leave the appliance unattended when it is plugged in. Always put
the appliance on a heat-resistant surface when it is heating up and
when it is hot.
For safety reasons, the straightener automatically switches off after
having been on for 1 hour.
3 Select a temperature setting that is suitable for your hair type.
- Always select a low setting when you use the straightener for the rst
time.
- For coarse, curly or hard-to-straighten hair, select a medium to high
setting (170 and up).
- For ne, medium-textured or softly waved hair, select a medium to
low setting (160 and below).
Note: Take extra care with pale, blonde, bleached or colour-treated hair, since
it is susceptible to damage at high temperatures.
4 Use the + and - buttons to set the appropriate temperature
setting. (Fig. 5)
, The display shows the selected temperature setting.
, When the appliance has heated up to the selected setting, the word
‘READY’ appears on the display.
, The bars on the display show the remaining usage time of the
appliance. The total usage time is 60 minutes. Every ten minutes,
one of the six bars disappears. After 60 minutes, the appliance
switches off automatically.
5 Comb or brush your hair so that it is disentangled and
smooth. (Fig. 6)
6 Use a comb to divide the hair into sections. Do not put too much
hair in one section.
Note: It is better to section off the crown area and to straighten the hair
underneath rst. Then straighten the top area.
7 Take a section that is not wider than 5cm. Place it between the
straightening plates and press the handles of the appliance rmly
together.
ENGLISH 9