User manual

4 Slide the styler gently down the length of the hair in a few seconds.
When the plates are 3-5cm above the end of the lock, slightly twist
the appliance inwards or outwards to create the desired type of
ick.
Sleek look
1 Press the lever to open the straightening attachment.
2 Remove the straightening plates one by one. Grab the cool tip and
pull each plate out of the straightening attachment (Fig. 11).
3 Turn the plates round and slide them back into the attachment with
theatsidespointingtowardseachother(Fig.12).
You can now use the straightening attachment to create sleek hair
without icks.
Make sure that the edges of the plates are inserted properly into the
grooves.
4 Take a lock of hair (max. 5 to 6cm wide). Press the lever to open
the straightening attachment and place the lock between the plates.
5 Slide the styler gently down the length of the hair in a few seconds.
6 Let the sleek hair cool down before you comb or brush it.
Cleaning
Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
1 Unplug the appliance.
2 Place the styler on the support of the attachment in a safe place
and let it cool down.
3 Clean the appliance and the attachments with a small brush or a
dry cloth.
Storage
1
Unplug the appliance.
ENGLISH12